Home › Engine / Hybrid System › 2ZR-FXE (ENGINE CONTROL) › INTEGRATION RELAY
RM2070E _51 Engine / Hybrid System _061905 2ZR-FXE ENGINE CONTROL _0301572 INTEGRATION RELAY A

2ZR-FXE ENGINE CONTROL  INTEGRATION RELAY  REMOVAL  


PROCEDURE

Hide 82662A 1.REMOVE NO. 1 RELAY BLOCK COVER

Hide 82641C 2.REMOVE NO. 2 INTEGRATION RELAY

a.
A212309

Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws and disconnect the No. 2 integration relay.


b.
A212310

Disconnect the 3 connectors and remove the No. 2 integration relay.