Refer to the description for DTC P0A01-726 (See page Engine / Hybrid System>HYBRID / BATTERY CONTROL>HYBRID CONTROL SYSTEM>P0A01-726).
| DTC No. | INF Code | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| P0A02 | 719 | Short to GND in the HV coolant temperature sensor circuit | Inverter with converter assembly |
| P0A03 | 720 | Open or short to +B in the HV coolant temperature sensor circuit |
After the repair, clear the DTCs and perform the following procedure to check that DTCs are not output. (a)Turn the power switch on (IG) and wait for 5 seconds or more.
Refer to replace inverter with converter assembly parts (See page Engine / Hybrid System>HYBRID / BATTERY CONTROL>HYBRID CONTROL SYSTEM>DTC CHECK / CLEAR).
NEXT