Home › Engine / Hybrid System › HYBRID / BATTERY CONTROL › HYBRID CONTROL SYSTEM › 2012.03–2016.05
RM2070E _51 Engine / Hybrid System _061906 HYBRID / BATTERY CONTROL _0301573 HYBRID CONTROL SYSTEM A

HYBRID / BATTERY CONTROL  HYBRID CONTROL SYSTEM  CUSTOMIZE PARAMETERS  


PROCEDURE

Hide 1.CUSTOMIZE HYBRID CONTROL SYSTEM

HINT:

The following items can be customized.


NOTICE:
·

When the customer requests a change in a function, first make sure that the function can be customized.

·

Be sure to make a note of the current settings before customizing.

·

When troubleshooting a function, first make sure that the function is set to the default setting.



a.

Customizing with the GTS

i.

Connect the GTS to the DLC3.


ii.

Turn the power switch on (IG).


iii.

Turn the GTS on.


iv.

Enter the following menus: Customize Setting / Other.


v.

Select the setting by referring to the table below.

Display Default Content Setting Relevant ECU
Body Ctrl with Torque Demand ON Function to control the amount of body pitch and bounce to improve ride comfort and handling stability. ON or OFF Power management control ECU

HINT:

Set the function to ON as it helps improve ride comfort and handling stability by controlling the amount of body pitch and bounce.