Home › Engine / Hybrid System › HYBRID / BATTERY CONTROL › HYBRID BATTERY SYSTEM › 2014.11–2016.05
RM2070E _51 Engine / Hybrid System _061906 HYBRID / BATTERY CONTROL _0301574 HYBRID BATTERY SYSTEM T

HYBRID / BATTERY CONTROL  HYBRID BATTERY SYSTEM  PROBLEM SYMPTOMS TABLE  


HYBRID BATTERY SYSTEM (w/o Multi-information Display)
Symptom Suspected Area See page
The power switch cannot be turned on (READY) after replacing the HV battery, power management control ECU or ECM.
·

Power management control ECU

·

ECM


HINT:

The power management control ECU and ECM vary by HV battery type. If the wrong type of power management control ECU or ECM is installed, the power switch cannot be turned on (READY).


-
Hybrid battery indicator light comes on the combination meter sub-assembly Hybrid Battery Indicator Light Comes On (Click here)

HYBRID BATTERY SYSTEM (w/ Multi-information Display)
Symptom Suspected Area See page
The power switch cannot be turned on (READY) after replacing the HV battery, power management control ECU or ECM.
·

Power management control ECU

·

ECM


HINT:

The power management control ECU and ECM vary by HV battery type. If the wrong type of power management control ECU or ECM is installed, the power switch cannot be turned on (READY).


-
"HAVE TRACTION BATTERY INSPECTED" is displayed on the multi-information display. "HAVE TRACTION BATTERY INSPECTED" is displayed. (Click here)