Home › Engine / Hybrid System › HYBRID / BATTERY CONTROL › ACCELERATOR PEDAL SENSOR
RM2070E _51 Engine / Hybrid System _061906 HYBRID / BATTERY CONTROL _0301582 ACCELERATOR PEDAL SENSOR A

HYBRID / BATTERY CONTROL  ACCELERATOR PEDAL SENSOR  REMOVAL  


PROCEDURE

Hide 78110K 1.REMOVE ACCELERATOR PEDAL SENSOR ASSEMBLY

a.
A399845E01
0.063,0.052 0.344,0.271 0.281,0.219 12 true *A 0.063,2.344 0.344,2.563 0.281,0.219 12 true *B

Disconnect the accelerator pedal sensor assembly connector.

Text in Illustration
*A for LHD:
*B for RHD:


b.

Remove the 2 bolts and accelerator pedal sensor assembly.

NOTICE:
·

Avoid physical shock to the accelerator pedal sensor assembly.

·

Do not disassemble the accelerator pedal sensor assembly.

·

The accelerator pedal sensor assembly does not require lubrication.

·

Do not apply oil or other lubricants to the accelerator pedal sensor assembly. If applied, the accelerator pedal sensor assembly must be replaced.