Home › Engine / Hybrid System › HYBRID / BATTERY CONTROL › RELAY
RM2070E _51 Engine / Hybrid System _061906 HYBRID / BATTERY CONTROL _0301583 RELAY G

HYBRID / BATTERY CONTROL  RELAY  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 1.INSPECT IGCT RELAY

a.

Inspect IGCT MAIN relay

i.
E209495

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
3 - 5 Auxiliary battery voltage is not applied between terminals 1 and 2 10 kΩ or higher
3 - 5 Auxiliary battery voltage is applied between terminals 1 and 2 Below 1 Ω


If the result is not as specified, replace the relay.