Home › Engine / Hybrid System › 2ZR-FXE (EMISSION CONTROL) › PCV VALVE
RM2070E _51 Engine / Hybrid System _061909 2ZR-FXE EMISSION CONTROL _0301615 PCV VALVE G

2ZR-FXE EMISSION CONTROL  PCV VALVE  INSPECTION  


PROCEDURE

Hide 12204 1.INSPECT VENTILATION VALVE SUB-ASSEMBLY

a.

Install a clean hose to the ventilation valve sub-assembly.


b.

Check ventilation valve sub-assembly operation.

i.
A192760E03
2.946,1.688 3.108,1.846 0.162,0.158 10 *b 1.17,1.72 1.334,1.899 0.164,0.178 10 *1 2.684,0.746 2.863,0.915 0.178,0.169 10 *a 1.643,1.255 1.265,1.559 1.265,1.559 1.265,1.692 false

Blow air into the cylinder block side, and check that air passes through easily.

Text in Illustration
*1 Clean Hose
*a Cylinder Block Side
*b Air

CAUTION:

Do not suck air through the valve.

Petroleum substances inside the valve are hazardous to your health.


If the result is not as specified, replace the ventilation valve sub-assembly.


ii.
A192761E14
1.938,0.521 1.771,0.521 1.771,0.521 1.573,0.917 false 0.75,1.427 0.917,1.594 0.167,0.167 10 false *a 0.5,0.323 0.656,0.469 0.156,0.146 10 false *b 1.979,0.438 2.177,0.594 0.198,0.156 10 false *1

Blow air into the intake manifold side, and check that air passes through with difficulty.

Text in Illustration
*1 Clean Hose
*a Intake Manifold Side
*b Air

CAUTION:

Do not suck air through the valve.

Petroleum substances inside the valve are hazardous to your health.


If the result is not as specified, replace the ventilation valve sub-assembly.



c.

Remove the clean hose from the ventilation valve sub-assembly.