Home › Engine / Hybrid System › 2ZR-FXE (LUBRICATION) › OIL PUMP
RM2070E _51 Engine / Hybrid System _061912 2ZR-FXE LUBRICATION _0301631 OIL PUMP A

2ZR-FXE LUBRICATION  OIL PUMP  REASSEMBLY  


PROCEDURE

Hide 15012 1.INSTALL OIL PUMP COVER SUB-ASSEMBLY

a.
A153830E03
1.271,0.874 0.731,1.49 0.731,1.49 1.344,1.005 false 0.516,1.433 0.685,1.585 0.170,0.152 10 *1

Coat the oil pump drive and driven rotors with engine oil, and place them into the oil pump with the marks facing the oil pump cover side.

Text in Illustration
*1 Mark


b.
A216970

Install the oil pump cover with the 5 bolts.

Torque:
8.8 N*m (90 kgf*cm, 78 in.*lbf)


Hide 15131 2.INSTALL OIL PUMP RELIEF VALVE

a.
A216969E01
0.827,2.941 1.006,3.105 0.178,0.164 10 *1 0.506,2.669 0.682,3.008 0.682,3.008 0.773,3.008 false 1.193,2.626 1.372,2.804 0.178,0.178 10 *2 0.888,2.374 1.064,2.713 1.064,2.713 1.155,2.713 false 1.69,2.365 1.868,2.539 0.178,0.173 10 *3 1.371,2.131 1.547,2.47 1.547,2.47 1.638,2.47 false

Coat the relief valve with engine oil.

Text in Illustration
*1 Plug
*2 Valve Spring
*3 Relief Valve


b.

Insert the relief valve and valve spring into the pump body hole.


c.

Using a 27 mm socket wrench, install the plug.

Torque:
49 N*m (500 kgf*cm, 37 ft.*lbf)