Home › Engine / Hybrid System › CRUISE CONTROL › DYNAMIC RADAR CRUISE CONTROL SYSTEM › 2014.11–2017.12
RM2070E _51 Engine / Hybrid System _061914 CRUISE CONTROL _0301640 DYNAMIC RADAR CRUISE CONTROL SYSTEM D

CRUISE CONTROL  DYNAMIC RADAR CRUISE CONTROL SYSTEM  OPERATION CHECK  


INPUT SIGNAL CHECK


E187970E02
3.014,2.096 3.198,2.294 0.184,0.198 10 *a 1.691,0.326 1.875,0.524 0.184,0.198 10 *c 1.399,2.654 1.582,2.851 0.184,0.198 10 *b

a.

Connect the GTS to the DLC3.


b.

Check the cruise control switch using the Data List function of the GTS (ON-OFF, -/SET and +/RES).

Text in Illustration
*a ON/OFF
*b -/SET
*c +/RES



INSPECT MODE SWITCH


E319130E01
2.396,0.281 2.708,0.479 0.313,0.198 10 false *b 2.615,1.365 2.927,1.563 0.313,0.198 10 false *a

a.

Turn the power switch on (IG).

Text in Illustration
*a ON/OFF
*b MODE


b.

Turn the cruise control system on using the cruise control switch (ON-OFF button). Then push the cruise control switch to MODE for 1 second or more to change to the constant speed control mode.


c.
E224649E02
1.075,0.42 1.307,0.647 0.232,0.227 10 *a 1.091,2.31 1.361,2.573 0.270,0.263 10 *b

Check that the cruise control indicator light (vehicle-to-vehicle distance control mode) goes off and the cruise control indicator light (constant speed control mode) illuminates.

Text in Illustration
*a Cruise Control Indicator Light
(Vehicle-to-vehicle distance control mode)
*b Cruise Control Indicator Light
(Constant speed control mode)

NOTICE:

Do not push any other switches before pushing the cruise control switch to MODE. If another switch is pushed, turn the cruise control system off and repeat the procedure above.


HINT:

If a malfunction is detected, turn the power switch off and repeat the procedure above.




INSPECT STEERING PAD SWITCH ASSEMBLY


a.

Turn the power switch on (IG).


b.

Turn the cruise control system on using the cruise control switch (ON-OFF button).


c.

Press the vehicle-to-vehicle distance control switch of the steering pad switch.


d.

Check that the indication of the vehicle-to-vehicle distance, which is shown on the combination meter display, changes from long to middle to short in that order.

B385835E02
3.545,3.241 3.877,3.526 0.332,0.286 10 *d 5.626,3.233 5.958,3.519 0.332,0.286 10 *e 4.973,1.176 5.305,1.462 0.332,0.286 10 *a 3.539,2.601 3.871,2.886 0.332,0.286 10 *b 1.46,3.239 1.791,3.525 0.332,0.286 10 *c

Text in Illustration
*a Distance Control Switch *b Combination Meter Display
*c Long *d Middle
*e Short - -

HINT:

Long is automatically selected each time the hybrid system is started.