Home › Engine / Hybrid System › CRUISE CONTROL › LANE DEPARTURE ALERT SYSTEM › 2014.11–2017.12
RM2070E _51 Engine / Hybrid System _061914 CRUISE CONTROL _0301643 LANE DEPARTURE ALERT SYSTEM U

CRUISE CONTROL  LANE DEPARTURE ALERT SYSTEM  TERMINALS OF ECU  


CHECK LANE DEPARTURE WARNING CAMERA


U191401E02
2.031,0.823 2.354,1.021 0.323,0.198 10 false U13

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
U13-4 (LKSW) - U13-11 (GND) Y - W-B Lane departure alert main switch Power switch on (IG), lane departure alert main switch (integration control and panel assembly) off 4 V or higher
U13-4 (LKSW) - U13-11 (GND) Y - W-B Lane departure alert main switch Power switch on (IG), lane departure alert main switch (integration control and panel assembly) on Below 1 V
U13-6 (CA1P) - U13-11 (GND) B - W-B CAN communication signal Power switch on (IG) Pulse generation
(Waveform 1)
U13-7 (IGB) - U13-11 (GND) V - W-B Power source Power switch on (IG) 11 to 14 V
U13-11 (GND) - Body ground W-B - Body ground Ground Always Below 1 Ω
U13-12 (CA1N) - U13-11 (GND) W - W-B CAN communication signal Power switch on (IG) Pulse generation
(Waveform 1)

If the result is not as specified, there may be a malfunction on the wire harness side.

HINT:

Oscilloscope waveform samples are provided here for reference only. Noise and fluctuating waveforms have been omitted.


a.
A379250E04
0.271,0.656 0.729,0.854 0.458,0.198 10 false CH1 0.271,1.313 0.729,1.51 0.458,0.198 10 false CH2 2.948,1.208 3.406,1.406 0.458,0.198 10 false GND 2.958,1.563 3.417,1.76 0.458,0.198 10 false GND

Waveform 1 (CAN communication signal)

Item Content
Terminal Name CH1: U13-6 (CA1P) - U13-11 (GND)
CH2: U13-12 (CA1N) - U13-11 (GND)
Tester Range 1 V/DIV., 50 μs./DIV.
Condition Power switch on (IG)

HINT:

The waveform will vary depending on the content of the digital communication (digital signal).