Home › Engine / Hybrid System › CRUISE CONTROL › LANE DEPARTURE ALERT SYSTEM › 2014.11–2017.12
RM2070E _51 Engine / Hybrid System _061914 CRUISE CONTROL _0301643 LANE DEPARTURE ALERT SYSTEM D

CRUISE CONTROL  LANE DEPARTURE ALERT SYSTEM  DIAGNOSIS SYSTEM  


DIAGNOSIS FUNCTION


a.
E284062E01
0.591,0.09 0.830,0.329 0.239,0.239 10 *a 1.7,0.09 1.939,0.329 0.239,0.239 10 *b

The diagnosis function makes the master warning light and the multi-information display turn on, and the lane departure alert indicator turns off as shown in the illustration. When a malfunction occurs in the lane departure alert system, DTCs are stored in the lane departure warning camera.

Text in Illustration
*a Master Warning Light
*b Lane Departure Alert Indicator

NOTICE:

The master warning light turns off if the system returns to a normal condition.




CHECK INDICATOR


E284062E01
0.591,0.09 0.830,0.329 0.239,0.239 10 *a 1.7,0.09 1.939,0.329 0.239,0.239 10 *b

a.

When a malfunction occurs in the lane departure alert system, the system turns off the lane departure alert indicator and the master warning light illuminates at the same time a "pong" sound is heard. Also, "LANE DEPARTURE ALERT MALFUNCTION VISIT YOUR DEALER" is displayed in the combination meter sub-assembly and the lane departure warning camera stores DTCs.

Text in Illustration
*a Master Warning Light
*b Lane Departure Alert Indicator

NOTICE:

If DTCs related to the communication system are stored, "LANE DEPARTURE ALERT MALFUNCTION VISIT YOUR DEALER", which is displayed in the combination meter sub-assembly, disappears when the system returns to normal.

If DTCs not related to the communication system are stored, "LANE DEPARTURE ALERT MALFUNCTION VISIT YOUR DEALER" is displayed in the combination meter sub-assembly, disappears when the power switch is turned off then back on (IG) after the system returns to normal.