If the transmission control ECU assembly detects a malfunction, the fail-safe functions shown in the table below are activated.
| DTC No. | Fail-safe Function | Problem Symptoms |
|---|---|---|
| C2300
C2301 |
In order to release park (P), the shift control actuator assembly is operated.
(Depending on the cause of the malfunction, park (P) cannot be released.) |
Either of the following may occur:
·
The shift state (P) is not indicated correctly on the meter. ·
Although the shift state is indicated on the combination meter, the vehicle cannot be driven. |
| C2303 | - | The auxiliary battery is discharged. |
| C2304
C2305 C2306 |
The P CON MTR relay (transaxle parking lock control relay) is turned off. | The parking lock mechanism cannot be switched. |
| C2307 | The P CON MTR relay (transaxle parking lock control relay) is turned off. | Either of the following may occur:
·
The shift state (P) is not indicated correctly on the meter. ·
Although the shift state is indicated on the combination meter, the vehicle cannot be driven. |
| C2308 | - | Either of the following may occur:
·
The parking lock mechanism cannot be switched. ·
The key reminder buzzer sounds constantly. |
| C2309 | The P CON MTR relay (transaxle parking lock control relay) is turned off. | The parking lock mechanism cannot be switched. |
| C2311 | - | The parking lock mechanism cannot be switched. |