Home › Drivetrain › P410 (HYBRID TRANSMISSION / TRANSAXLE) › ELECTRONIC SHIFT LEVER SYSTEM › 2012.03–2014.11
RM2070E _52 Drivetrain _061915 P410 HYBRID TRANSMISSION / TRANSAXLE _0301645 ELECTRONIC SHIFT LEVER SYSTEM J

P410 HYBRID TRANSMISSION / TRANSAXLE  ELECTRONIC SHIFT LEVER SYSTEM  Auxiliary Battery Low Voltage  


DESCRIPTION

When the transmission control ECU judges that the power source voltage (+B) is low, a warning message is displayed on the combination meter sub-assembly.

PROCEDURE

1.READ VALUE USING GTS (LOW VOLTAGE ACTUATOR ABNORMAL HISTORY)
a.

Connect the GTS to the DLC3.


b.

Turn the power switch on (IG).


c.

Enter the following menus: Body Electrical / Transmission Control / Data List / Low Voltage Actuator Abnormal History.


d.

Read the Data List displayed on the GTS.

Result
Result Proceed to
"Low Voltage Actuator Abnormal History" is ON. A
"Low Voltage Actuator Abnormal History" is OFF. B


e.

Turn the power switch off.



A

2.CHARGE OR REPLACE AUXILIARY BATTERY

B

2.CHARGE OR REPLACE AUXILIARY BATTERY
a.

Charge or replace the auxiliary battery. (See page Power Source / Network>2ZR-FXE (BATTERY / CHARGING)>AUXILIARY BATTERY>COMPONENTS)



NEXT

3.CHECK OPERATION
3.CHECK OPERATION
a.

Turn the power switch on (READY).


b.

With the brake pedal depressed, select neutral (N).


c.

Push the P position switch (transmission shift main switch).


d.

Check that "WHEN PARKING. APPLY PARKING BRAKE SECURELY" is not displayed on the combination meter sub-assembly.


e.

Turn the power switch off.


f.

Disconnect the P CON MAIN fuse and wait for 30 seconds or more.


g.

Check that the electronic shift lever system operates correctly.



NEXT

END