Home › Suspension › FRONT SUSPENSION › FRONT SHOCK ABSORBER › from 2016.05
RM2070E _53 Suspension _061919 FRONT SUSPENSION _0301667 FRONT SHOCK ABSORBER N

FRONT SUSPENSION  FRONT SHOCK ABSORBER  DISPOSAL  


PROCEDURE

Hide 48520 1.DISPOSE OF FRONT SHOCK ABSORBER ASSEMBLY

a.

Fully extend the front shock absorber assembly.


b.
C355610E01
1.598,0.266 1.828,0.450 0.229,0.184 10 A 2.498,0.265 2.727,0.449 0.229,0.184 10 B

Using a drill, make a hole in the cylinder between A and B shown in the illustration to discharge the gas inside.

CAUTION:

Always use proper safety equipment and be careful when drilling because shards of metal may fly about.


HINT:

The gas is colorless, odorless and non-poisonous.