1.REMOVE FRONT WHEELS
51441
2.REMOVE NO. 1 ENGINE UNDER COVER
51442E
3.REMOVE NO. 2 ENGINE UNDER COVER
48810
4.REMOVE FRONT STABILIZER LINK ASSEMBLY LH
Remove the 2 nuts and front stabilizer link assembly LH.
| *a | Upper Side |
| *b | Lower Side |
If the ball joint turns together with the nut, use a hexagon wrench to hold the stud bolt.
48820B
5.REMOVE FRONT STABILIZER LINK ASSEMBLY RH
Perform the same procedure as for the LH side.
48069
6.SEPARATE FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY LH
48069
7.REMOVE FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY LH
52256
8.REMOVE FRONT SUSPENSION MEMBER FRONT BRACE LH
Remove the 4 bolts and front suspension member front brace LH from the front suspension crossmember sub-assembly.
52255
9.REMOVE FRONT SUSPENSION MEMBER FRONT BRACE RH
Perform the same procedure as for the LH side.
48811
10.REMOVE FRONT STABILIZER BAR
Remove the front stabilizer bar with 2 front stabilizer bar bushings from the front suspension crossmember sub-assembly.
48815E
11.REMOVE FRONT STABILIZER BAR BUSHING LH
Remove the front stabilizer bar bushing LH from the front stabilizer bar.
48815D
12.REMOVE FRONT STABILIZER BAR BUSHING RH
Perform the same procedure as for the LH side.