Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › ELECTRONICALLY CONTROLLED BRAKE SYSTEM › 2015.08–2016.05
RM2070E _54 Brake _061923 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0301683 ELECTRONICALLY CONTROLLED BRAKE SYSTEM C

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  ELECTRONICALLY CONTROLLED BRAKE SYSTEM  U0073/94  Control Module Communication Bus OFF  U0120/96  Lost Communication with Starter / Generator Control Module  U0123/62  Lost Communication with Yaw Rate Sensor Module  U0124/95  Lost Communication with Lateral Acceleration Sensor Module  U0126/63  Lost Communication with Steering Angle Sensor Module  U0293/59  Communication Error from HV ECU  


DESCRIPTION

The skid control ECU receives the signals from the power management control ECU, steering angle sensor, certification ECU (smart key ECU assembly), and yaw rate and acceleration sensor via the CAN communication system.

DTC Code INF Code DTC Detection Condition Trouble Area
U0073/94 461 Either of the following is detected:
1.

Yaw rate and acceleration sensor communication is disabled for 1 second or more.

2.

Yaw rate and acceleration sensor communication is disabled once or more per 5 seconds 10 times or more within 60 seconds.


·

CAN communication line (V bus)

·

Yaw rate and acceleration sensor

·

Brake booster with master cylinder (Skid control ECU)


↑ 462 Either of the following is detected:
1.

Steering angle sensor communication is disabled for 1 second or more.

2.

Steering angle sensor communication is disabled once or more per 5 seconds 10 times or more within 60 seconds.


·

CAN communication line (V bus)

·

Steering angle sensor

·

Brake booster with master cylinder (Skid control ECU)


↑ 463
464
Bus off occurs once or more per 0.1 seconds 10 times repeatedly.
·

CAN communication line

·

Brake booster with master cylinder (Skid control ECU)


↑ 465
466
Sending does not complete within 5 seconds after data is output from the skid control ECU. ↑
U0120/96 471 Push start switch data is invalid for 3 seconds or more.
·

CAN communication line

·

Certification ECU (Smart key ECU assembly)

·

Brake booster with master cylinder (Skid control ECU)


U0123/62 731 Yaw rate sensor communication is disabled for 1 second or more.
·

CAN communication line (V bus)

·

Yaw rate and acceleration sensor

·

Brake booster with master cylinder (Skid control ECU)


↑ 732 Yaw rate sensor communication is disabled once or more per 5 seconds 10 times or more within 60 seconds. ↑
U0124/95 591 Acceleration sensor communication is disabled for 1 second or more.
·

CAN communication line (V bus)

·

Yaw rate and acceleration sensor

·

Brake booster with master cylinder (Skid control ECU)


↑ 592 Acceleration sensor communication is disabled once per 5 seconds 10 times or more within 60 seconds. ↑
U0126/63 741 Steering angle sensor communication is disabled for 1 second or more.
·

CAN communication line (V bus)

·

Steering angle sensor

·

Brake booster with master cylinder (Skid control ECU)


↑ 742 Steering angle sensor communication is disabled once or more per 5 seconds 10 times or more within 60 seconds. ↑
U0293/59 411
412
413
Either of the following is detected:
1.

With the IG2 terminal voltage 9.5 V or more, data from the power management control ECU cannot be received for 2 seconds or more.

2.

With the IG2 terminal voltage 9.5 V or more, data from the power management control ECU cannot be received once or more within 5 seconds occur 10 times in succession.


·

CAN communication line (Sub bus 12)

·

Power management control ECU

·

Brake booster with master cylinder (Skid control ECU)



WIRING DIAGRAM

for LHD


C316022E06
0.323,3.125 1.635,3.49 1.313,0.365 10 false Power Management Control ECU 0.427,8.135 1.698,8.531 1.271,0.396 10 false Yaw Rate and Acceleration Sensor 0.479,4.917 1.448,5.24 0.969,0.323 10 false Steering Angle Sensor 1.26,2.073 1.448,2.219 0.188,0.146 10 false 25 5.823,1.125 6.01,1.271 0.188,0.146 10 false 34 5.823,0.583 6.01,0.729 0.188,0.146 10 false 35 1.26,2.615 1.448,2.76 0.188,0.146 10 false 24 5.365,0.469 5.552,0.625 0.188,0.156 10 false 3 1.26,7.698 1.375,7.854 0.115,0.156 10 false 2 1.26,7.156 1.375,7.313 0.115,0.156 10 false 3 1.26,4.479 1.375,4.635 0.115,0.156 10 false 3 1.26,3.948 1.438,4.104 0.177,0.156 10 false 4 5.375,1.01 5.573,1.167 0.198,0.156 10 false 9 1.792,4.385 1.99,4.542 0.198,0.156 10 false 10 0.823,2.146 1.219,2.292 0.396,0.146 10 false CA1H 0.854,2.688 1.281,2.833 0.427,0.146 10 false CA1L 0.813,7.729 1.208,7.875 0.396,0.146 10 false CANL 0.823,7.24 1.25,7.385 0.427,0.146 10 false CANH 6.042,1.229 6.438,1.375 0.396,0.146 10 false CA2L 6.031,0.667 6.458,0.813 0.427,0.146 10 false CA2H 0.823,4.583 1.219,4.729 0.396,0.146 10 false CANL 0.802,4.031 1.229,4.177 0.427,0.146 10 false CANH 0.073,3.125 0.313,3.271 0.24,0.146 10 false L6 2,1.51 3.281,1.667 1.281,0.156 10 false Junction Connector 1.885,2.615 2.073,2.771 0.188,0.156 10 false 10 2.885,3 3.063,3.156 0.177,0.156 10 false 11 0.188,4.917 0.469,5.063 0.281,0.146 10 false L51 0.135,8.125 0.458,8.271 0.323,0.146 10 false L12 1.26,0.583 1.448,0.729 0.188,0.146 10 false 31 1.271,1.135 1.458,1.281 0.188,0.146 10 false 30 0.833,0.656 1.229,0.802 0.396,0.146 10 false CA3P 0.833,1.208 1.281,1.354 0.448,0.146 10 false CA3N 6.042,7.823 6.438,7.969 0.396,0.146 10 false CA1L 6.052,7.271 6.479,7.417 0.427,0.146 10 false CA1H 4.104,8.094 5.344,8.25 1.24,0.156 10 false Junction Connector 3.823,7.792 4.188,7.938 0.365,0.146 10 false L132 1.833,7.594 2.021,7.75 0.188,0.156 10 false 6 1.833,7.042 2.01,7.198 0.177,0.156 10 false 5 5.823,7.167 6.021,7.323 0.198,0.156 10 false 37 5.813,7.688 6.01,7.844 0.198,0.156 10 false 38 3.25,0.469 3.438,0.625 0.188,0.156 10 false 2 5.604,8.094 5.927,8.24 0.323,0.146 10 false A58 5.917,8.094 7.135,8.448 1.219,0.354 10 false Brake Booster with Master Cylinder 5.281,0.667 5.594,0.813 0.313,0.146 10 false A67 2.156,3 2.333,3.156 0.177,0.156 10 false 5 3.125,2.333 3.865,2.656 0.74,0.323 10 false Junction Connector 5.281,1.198 5.594,1.344 0.313,0.146 10 false A67 5.281,7.25 5.594,7.396 0.313,0.146 10 false A67 5.281,7.792 5.594,7.938 0.313,0.146 10 false A67 5.375,7.063 5.563,7.219 0.188,0.156 10 false 2 5.375,7.583 5.573,7.74 0.198,0.156 10 false 8 3.833,7.229 4.198,7.375 0.365,0.146 10 false L132 3.833,1.208 4.198,1.354 0.365,0.146 10 false L132 3.833,0.667 4.198,0.813 0.365,0.146 10 false L132 3.948,0.469 4.135,0.625 0.188,0.156 10 false 3 3.958,1.01 4.156,1.167 0.198,0.156 10 false 9 3.958,7.042 4.146,7.198 0.188,0.156 10 false 6 3.906,7.594 4.104,7.75 0.198,0.156 10 false 12 3.125,2.177 3.49,2.323 0.365,0.146 10 false L133 3.146,0.667 3.51,0.813 0.365,0.146 10 false L101 3.135,1.219 3.521,1.365 0.385,0.146 10 false L101 3.25,1.021 3.438,1.177 0.188,0.156 10 false 4 1.938,2.073 2.115,2.229 0.177,0.156 10 false 4 1.833,0.479 2.021,0.635 0.188,0.156 10 false 5 1.708,0.667 2.063,0.813 0.354,0.146 10 false L102 1.719,1.219 2.083,1.365 0.365,0.146 10 false L102 1.823,1.01 2.01,1.167 0.188,0.156 10 false 3 3.177,7.802 3.542,7.948 0.365,0.146 10 false L94 3.177,7.24 3.542,7.385 0.365,0.146 10 false L94 3.271,7.042 3.458,7.198 0.188,0.156 10 false 5 3.271,7.604 3.469,7.76 0.198,0.156 10 false 4 1.75,7.792 2.115,7.938 0.365,0.146 10 false L95 1.76,7.229 2.125,7.375 0.365,0.146 10 false L95 2.75,3.677 3.115,3.823 0.365,0.146 10 false L94 2.177,3.677 2.542,3.823 0.365,0.146 10 false L94 1.75,4.031 2.115,4.177 0.365,0.146 10 false L94 1.75,4.583 2.115,4.729 0.365,0.146 10 false L94 1.781,3.844 1.969,4 0.188,0.156 10 false 11 3.115,3.677 3.292,3.833 0.177,0.156 10 false 1 1.958,3.688 2.135,3.844 0.177,0.156 10 false 2 1.958,8.083 3.219,8.24 1.26,0.156 10 false Junction Connector 1.833,5.99 2.031,6.146 0.198,0.156 10 false 7 1.74,6.219 2.104,6.365 0.365,0.146 10 false L94 1.823,5.469 2.021,5.625 0.198,0.156 10 false 8 1.74,5.677 2.104,5.823 0.365,0.146 10 false L94 1.281,5.583 1.479,5.74 0.198,0.156 10 false 9 1.25,6.125 1.5,6.281 0.25,0.156 10 false 10 0.073,6.552 1.615,6.938 1.542,0.385 10 false Certification ECU (Smart Key ECU Assembly) 0.073,6.375 0.49,6.583 0.417,0.208 10 false L62 0.802,5.667 1.229,5.813 0.427,0.146 10 false CANH 0.813,6.198 1.208,6.344 0.396,0.146 10 false CANL


for RHD


C316022E07
0.292,3.146 1.531,3.719 1.24,0.573 10 false Power Management Control ECU 0.448,8.135 1.698,8.615 1.25,0.479 10 false Yaw Rate and Acceleration Sensor 0.458,4.938 1.385,5.333 0.927,0.396 10 false Steering Angle Sensor 1.26,2.063 1.448,2.208 0.188,0.146 10 false 25 5.802,1.115 5.99,1.26 0.188,0.146 10 false 34 5.802,0.573 5.99,0.719 0.188,0.146 10 false 35 1.26,2.594 1.448,2.74 0.188,0.146 10 false 24 5.375,0.469 5.563,0.625 0.188,0.156 10 false 3 1.281,7.698 1.479,7.917 0.198,0.219 10 false 2 1.271,7.156 1.479,7.344 0.208,0.188 10 false 3 1.26,4.479 1.375,4.635 0.115,0.156 10 false 3 1.26,3.948 1.438,4.104 0.177,0.156 10 false 4 5.375,1.01 5.573,1.167 0.198,0.156 10 false 9 1.792,4.385 1.99,4.542 0.198,0.156 10 false 11 0.823,2.146 1.219,2.292 0.396,0.146 10 false CA1H 0.854,2.688 1.281,2.833 0.427,0.146 10 false CA1L 0.813,7.729 1.208,7.875 0.396,0.146 10 false CANL 0.823,7.24 1.25,7.385 0.427,0.146 10 false CANH 6.042,1.229 6.438,1.375 0.396,0.146 10 false CA2L 6.031,0.667 6.458,0.813 0.427,0.146 10 false CA2H 0.823,4.583 1.219,4.729 0.396,0.146 10 false CANL 0.802,4.031 1.229,4.177 0.427,0.146 10 false CANH 0.063,3.146 0.302,3.292 0.24,0.146 10 false L6 2,1.51 3.281,1.667 1.281,0.156 10 false Junction Connector 1.885,2.615 2.073,2.771 0.188,0.156 10 false 10 2.885,3 3.083,3.188 0.198,0.188 10 false 12 0.188,4.938 0.51,5.229 0.323,0.292 10 false L51 0.167,8.125 0.542,8.354 0.375,0.229 10 false L12 1.26,0.573 1.448,0.719 0.188,0.146 10 false 31 1.271,1.125 1.458,1.271 0.188,0.146 10 false 30 0.833,0.656 1.229,0.802 0.396,0.146 10 false CA3P 0.833,1.208 1.281,1.354 0.448,0.146 10 false CA3N 6.042,7.823 6.438,7.969 0.396,0.146 10 false CA1L 6.052,7.271 6.479,7.417 0.427,0.146 10 false CA1H 4.115,8.094 5.448,8.344 1.333,0.25 10 false Junction Connector 3.823,7.792 4.188,7.938 0.365,0.146 10 false L132 1.833,7.573 2.021,7.729 0.188,0.156 10 false 5 1.833,7.021 2.01,7.177 0.177,0.156 10 false 6 5.813,7.146 6.01,7.302 0.198,0.156 10 false 37 5.802,7.677 6,7.833 0.198,0.156 10 false 38 3.25,0.458 3.438,0.615 0.188,0.156 10 false 2 5.615,8.094 5.979,8.292 0.365,0.198 10 false A58 5.917,8.094 7.083,8.667 1.167,0.573 10 false Brake Booster with Master Cylinder 5.281,0.667 5.594,0.813 0.313,0.146 10 false A67 2.156,3 2.333,3.156 0.177,0.156 10 false 6 3.125,2.333 3.865,2.656 0.74,0.323 10 false Junction Connector 5.281,1.198 5.594,1.344 0.313,0.146 10 false A67 5.281,7.25 5.594,7.396 0.313,0.146 10 false A67 5.281,7.792 5.594,7.938 0.313,0.146 10 false A67 5.333,7.031 5.521,7.188 0.188,0.156 10 false 1 5.354,7.583 5.552,7.74 0.198,0.156 10 false 7 3.833,7.229 4.198,7.375 0.365,0.146 10 false L132 3.833,1.208 4.198,1.354 0.365,0.146 10 false L132 3.833,0.667 4.198,0.813 0.365,0.146 10 false L132 3.948,0.458 4.135,0.615 0.188,0.156 10 false 3 3.958,0.99 4.156,1.146 0.198,0.156 10 false 9 3.927,7.021 4.115,7.177 0.188,0.156 10 false 5 3.906,7.573 4.104,7.729 0.198,0.156 10 false 11 3.125,2.177 3.49,2.323 0.365,0.146 10 false L133 3.146,0.667 3.51,0.813 0.365,0.146 10 false L101 3.135,1.219 3.521,1.365 0.385,0.146 10 false L101 3.25,1 3.438,1.156 0.188,0.156 10 false 4 1.938,2.073 2.115,2.229 0.177,0.156 10 false 4 1.833,0.458 2.021,0.615 0.188,0.156 10 false 5 1.708,0.667 2.063,0.813 0.354,0.146 10 false L102 1.719,1.219 2.083,1.365 0.365,0.146 10 false L102 1.823,1 2.01,1.156 0.188,0.156 10 false 3 3.177,7.802 3.542,7.948 0.365,0.146 10 false L94 3.177,7.24 3.542,7.385 0.365,0.146 10 false L94 3.219,7.021 3.406,7.177 0.188,0.156 10 false 1 3.24,7.583 3.438,7.74 0.198,0.156 10 false 2 1.75,7.792 2.115,7.938 0.365,0.146 10 false L95 1.76,7.229 2.125,7.375 0.365,0.146 10 false L95 2.75,3.677 3.115,3.823 0.365,0.146 10 false L94 2.177,3.677 2.542,3.823 0.365,0.146 10 false L94 1.75,4.031 2.115,4.177 0.365,0.146 10 false L94 1.75,4.583 2.115,4.729 0.365,0.146 10 false L94 1.781,3.844 1.969,4 0.188,0.156 10 false 10 3.115,3.677 3.292,3.833 0.177,0.156 10 false 5 1.958,3.688 2.135,3.844 0.177,0.156 10 false 4 2.01,8.073 3.396,8.302 1.385,0.229 10 false Junction Connector 1.833,5.99 2.031,6.146 0.198,0.156 10 false 8 1.74,6.219 2.104,6.365 0.365,0.146 10 false L94 1.823,5.469 2.021,5.625 0.198,0.156 10 false 7 1.74,5.677 2.104,5.823 0.365,0.146 10 false L94 1.281,5.583 1.521,5.781 0.24,0.198 10 false 9 1.281,6.125 1.552,6.354 0.271,0.229 10 false 10 0.042,6.552 1.563,6.938 1.521,0.385 10 false Certification ECU (Smart Key ECU Assembly) 0.052,6.396 0.5,6.604 0.448,0.208 10 false L62 0.802,5.667 1.229,5.813 0.427,0.146 10 false CANH 0.813,6.198 1.208,6.344 0.396,0.146 10 false CANL


PROCEDURE

1.CHECK HARNESS AND CONNECTOR (MOMENTARY INTERRUPTION)
a.

Using the GTS, check for any momentary interruptions in the wire harness and connector corresponding to a DTC (See page Brake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>ELECTRONICALLY CONTROLLED BRAKE SYSTEM>CHECK FOR INTERMITTENT PROBLEMS).

ABS/VSC/TRC
Tester Display Measurement Item/Range Normal Condition Diagnostic Note
Yaw Rate Open Yaw rate sensor open detection / Error or Normal Error: Momentary interruption
Normal: Normal
-
Steering Open Steering angle sensor open detection / Error or Normal Error: Momentary interruption
Normal: Normal
-
HV Communication Open Hybrid vehicle communication open detection / Error or Normal Error: Momentary interruption
Normal: Normal
-

Result:
Result Proceed to
There is a constant open circuit A
There are no momentary interruptions B
There are momentary interruptions C


HINT:

Perform the above inspection before removing any sensor or connector.




A

2.CHECK IF EACH SENSOR AND ECU CONNECTOR ARE SECURELY CONNECTED

B

3.RECONFIRM DTC

C

4.REPAIR OR REPLACE HARNESS OR CONNECTOR
2.CHECK IF EACH SENSOR AND ECU CONNECTOR ARE SECURELY CONNECTED
a.

Turn the power switch off (lock).


b.

Check if each sensor and ECU connector are securely connected.

OK:

Each sensor and ECU connector are securely connected.




OK

3.RECONFIRM DTC

NG

CONNECT CONNECTOR TO EACH SENSOR OR ECU CORRECTLY

3.RECONFIRM DTC
a.

Turn the power switch off (lock).


b.

Record the output DTCs (for ABS, VSC, electronically controlled brake system, and/or CAN communication system) (See page Brake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>ELECTRONICALLY CONTROLLED BRAKE SYSTEM>DTC CHECK / CLEAR for ABS, VSC and/or electronically controlled brake system, or Power Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM (w/o Central Gateway ECU)>DIAGNOSIS SYSTEM for CAN communication system).

HINT:

If the CAN communication system DTC and the relevant sensor DTCs are output simultaneously, troubleshoot the relevant sensor DTCs (for ABS, VSC and/or electronically controlled brake system) after the CAN communication system returns to normal.


Result:
Result Proceed to
DTC is not output A
DTC (ABS, VSC and/or electronically controlled brake system DTC) is output B
DTC (CAN communication system DTC) is output C




A

B

C

4.REPAIR OR REPLACE HARNESS OR CONNECTOR
a.

Turn the power switch off (lock).


b.

Repair or replace the harness or connector.


c.

Check for any momentary interruption between the skid control ECU and each sensor or ECU (See page Brake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>ELECTRONICALLY CONTROLLED BRAKE SYSTEM>CHECK FOR INTERMITTENT PROBLEMS).


d.

Check that there are no momentary interruptions.



NEXT

5.RECONFIRM DTC
5.RECONFIRM DTC
a.

Turn the power switch off (lock).



c.

Turn the power switch on (ready).


d.

Drive the vehicle and turn the steering wheel to the right and left at a speed of 15 km/h (9 mph) or more.


e.

f.

If ABS, VSC and/or electronically controlled brake system DTCs are output, record them (See page Brake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>ELECTRONICALLY CONTROLLED BRAKE SYSTEM>DTC CHECK / CLEAR).

Result:
Result Proceed to
DTC is not output A
DTC (ABS, VSC and/or electronically controlled brake system DTC) is output B
DTC (CAN communication system DTC) is output C


HINT:

The CAN communication system must be normal when repairing each sensor DTC (for ABS, VSC and/or electronically controlled brake system).




A

END

B

C