Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › YAW RATE AND ACCELERATION SENSOR › 2012.03–2016.05
RM2070E _54 Brake _061923 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0301686 YAW RATE AND ACCELERATION SENSOR A

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  YAW RATE AND ACCELERATION SENSOR  INSTALLATION  


PROCEDURE

Hide 89183A 1.INSTALL YAW RATE AND ACCELERATION SENSOR

a.

Install the yaw rate and acceleration sensor with the 2 bolts.

Torque:
8.5 N*m (87 kgf*cm, 75 in.*lbf)

NOTICE:
·

Do not damage the yaw rate and acceleration sensor.

·

Make sure that the yaw rate and acceleration sensor is installed securely.

·

Do not use dropped or damaged parts.

·

Keep the contact surfaces of the yaw rate and acceleration sensor and the body free of foreign matter.

·

Make sure that the sensor is facing the correct direction.




b.

Connect the yaw rate and acceleration sensor connector.

NOTICE:

Make sure that the yaw rate and acceleration sensor connector is connected securely.



Hide 3. PERFORM YAW RATE AND ACCELERATION SENSOR ZERO POINT CALIBRATION