Home › Brake › BRAKE (REAR) › REAR BRAKE
RM2070E _54 Brake _061926 BRAKE (REAR) _0301703 REAR BRAKE A

BRAKE (REAR)  REAR BRAKE  DISASSEMBLY  


PROCEDURE

Hide 47831 1.REMOVE REAR DISC BRAKE PISTON

a.
C236546

Place a piece of cloth between the rear disc brake piston and rear disc brake cylinder assembly.


b.

Apply compressed air to remove the rear disc brake piston from the rear disc brake cylinder assembly.

CAUTION:

Do not place your fingers in front of the rear disc brake piston when using compressed air.


NOTICE:

Do not allow any brake fluid to spatter.



Hide 2.REMOVE CYLINDER BOOT

a.
C236548E02
2.269,0.677 2.432,0.840 0.163,0.163 10 *1 1.609,1.135 1.988,0.756 1.988,0.756 2.237,0.756 false

Using a screwdriver with its tip wrapped with vinyl tape, remove the cylinder boot from the rear disc brake cylinder.

Text in Illustration
*1 Vinyl Tape

NOTICE:

Be careful not to damage the rear disc brake cylinder.



Hide 3.REMOVE PISTON SEAL

a.
C236547E02
1.636,1.13 1.325,0.819 1.325,0.819 0.911,0.819 false 0.718,0.723 0.875,0.878 0.157,0.155 10 *1

Using a screwdriver with its tip wrapped with vinyl tape, remove the piston seal from the rear disc brake cylinder.

Text in Illustration
*1 Vinyl Tape

NOTICE:

Be careful not to damage the inner cylinder or cylinder groove.



Hide 31478C 4.REMOVE REAR DISC BRAKE BLEEDER PLUG CAP

Hide 47547C 5.REMOVE REAR DISC BRAKE BLEEDER PLUG