Home › Brake › PARKING BRAKE › PARKING BRAKE SWITCH(for RHD)
RM2070E _54 Brake _061927 PARKING BRAKE _0301710 PARKING BRAKE SWITCH(for RHD) G

PARKING BRAKE  PARKING BRAKE SWITCH(for RHD)  INSPECTION  


PROCEDURE

Hide 84550 1.INSPECT PARKING BRAKE SWITCH ASSEMBLY

a.
C196342E06
3.011,0.589 3.167,0.735 0.156,0.147 10 *1 0.146,1.33 0.302,1.477 0.156,0.147 10 *2 2.567,0.672 2.989,0.672 false 1.052,1.423 0.338,1.423 false 1.728,1.776 1.912,1.925 0.184,0.149 10 *a 1.533,1.43 1.709,1.579 0.177,0.149 10 *b

Measure the resistance between the connector terminal and the nut inside the parking brake switch assembly.

Text in Illustration
*1 Terminal
*2 Nut
*a ON
*b OFF

Standard Resistance
Tester Connection Condition Specified Condition
Terminal - Nut On (When shaft is not pressed) Below 1 Ω
Terminal - Nut Off (When shaft is pressed) 10 kΩ or higher

If the value is not as specified, replace the parking brake switch assembly.