The power steering ECU assembly receives signals from the brake booster with master cylinder (skid control ECU), the power management control ECU, the parking assist ECU via the CAN communication system.
| DTC No. | DTC Detection Condition | Trouble Area |
|---|---|---|
| U0129/42 | Lost communication with brake system control module | ·
CAN communication system ·
Brake booster with master cylinder (Skid control ECU) |
| U0293/41 | Lost communication with power management control ECU | ·
CAN communication system ·
Power management control ECU |
| U1105/46 | Lost Communication with Parking Assist ECU | ·
CAN communication system ·
Parking assist ECU |
Clear the DTCs (See page Steering>POWER ASSIST SYSTEMS>POWER STEERING SYSTEM>DTC CHECK / CLEAR).
Check for DTCs (See page Steering>POWER ASSIST SYSTEMS>POWER STEERING SYSTEM>DTC CHECK / CLEAR).
DTC is not output.
OK
(See pageGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING)
NG