89650
1.INSTALL POWER STEERING ECU ASSEMBLY
Install the power steering ECU assembly with the bolt and 2 nuts.
Connect the 3 connectors to the power steering ECU assembly.
for LHD:
Connect the connector to the power steering ECU assembly.
| *1 | Lock Lever |
| *2 | Lock of the Lock Lever |
As shown in the illustration, return the lock lever to its original position to connect the connector and securely push in the lock of the lock lever.
for RHD:
Connect the connector to the power steering ECU assembly.
| *1 | Lock Lever |
| *2 | Lock of the Lock Lever |
As shown in the illustration, return the lock lever to its original position to connect the connector and securely push in the lock of the lock lever.
Engage the wire harness clamp to the power steering ECU assembly.
2.INSTALL UPPER INSTRUMENT PANEL ASSEMBLY
3. ROTATION ANGLE SENSOR VALUE INITIALIZATION AND TORQUE SENSOR ZERO POINT CALIBRATION
4. ASSIST MAP WRITING