Home › Steering › STEERING COLUMN › STEERING COLUMN ASSEMBLY
RM2070E _55 Steering _061929 STEERING COLUMN _0301715 STEERING COLUMN ASSEMBLY G

STEERING COLUMN  STEERING COLUMN ASSEMBLY  INSPECTION  


PROCEDURE

Hide 1.INSPECT PRELOAD

a.
C226632E02
0.292,1.443 0.460,1.583 0.168,0.140 10 *1 3.085,0.923 3.234,1.069 0.149,0.145 10 *2 1.045,1.528 0.481,1.528 false 2.443,1.011 3.068,1.011 false

Secure the steering column assembly in a vice using aluminum plates and a piece of cloth.

Text in Illustration
*1 Wooden Block
*2 Piece of Cloth

NOTICE:
·

Do not overtighten the vice, as the steering column assembly may become deformed.

·

Support the steering column assembly with a wooden block or similar item to ensure that it does not fall.




b.
C226633E01
0.195,1.021 0.499,1.182 0.304,0.161 10 SST 1.735,1.109 0.547,1.109 false

Using SST, turn the main shaft and measure the preload.

SST
09616-00011  

Torque:
Preload : 0.91 to 1.45 N*m (10 to 14 kgf*cm, 9 to 12 in.*lbf)

If the preload is not as specified, replace the steering column assembly with a new one.


Hide 45250 2.INSPECT STEERING COLUMN ASSEMBLY

a.

Inspect the bushings.

i.
C206270E01
0.135,1.681 0.288,1.835 0.154,0.154 10 *1 1.714,1.445 1.714,1.758 1.714,1.758 0.304,1.758 false 0.985,1.149 0.985,1.758 false

Check that the 2 bushings are securely installed to the steering column assembly.

If the bushings are missing or damaged, replace the steering column assembly with a new one.

Text in Illustration
*1 Bushing


ii.

Check the 2 bushings for deformation and damage.

If the bushings are deformed or damaged, replace the steering column assembly with a new one.



b.

Inspect the capsules.

i.
C241695E01
3.001,0.716 3.122,0.863 0.121,0.147 10 B 2.517,1.126 2.638,1.272 0.121,0.147 10 A 2.806,1.765 2.959,1.909 0.154,0.144 10 *1 0.443,1.686 0.443,1.842 0.443,1.842 2.789,1.842 false 2.146,1.686 2.146,1.842 false

Check that the 2 capsules are securely installed to the steering column assembly as shown in the illustration.

Standard Dimension:
A B
2 mm (0.0787 in.) 17 mm (0.669 in.)


Text in Illustration
*1 Capsule

If the capsules are not positioned as specified, replace the steering column assembly with a new one.


ii.

Check the 2 capsules for deformation and damage.

If either of the capsules is deformed, loose, missing or damaged, replace the steering column assembly with a new one.