1.ALIGN FRONT WHEELS FACING STRAIGHT AHEAD
45130
2.REMOVE HORN BUTTON ASSEMBLY
45100
3.REMOVE STEERING WHEEL ASSEMBLY
Remove the steering wheel assembly set nut.
| *a | Matchmark |
Put matchmarks on the steering wheel assembly and steering main shaft.
Disconnect each connector from the spiral cable sub-assembly.
Using SST, remove the steering wheel assembly.
| *a | Turn |
| *b | Hold |
Apply a small amount of grease to the threads and tip of SST (09953-05020) before use.
45713A
4.REMOVE STEERING SHAKE DAMPER
Remove the 2 screws and steering shake damper from the steering wheel sub-assembly.
5.REMOVE STEERING PAD SWITCH ASSEMBLY
84632
6.REMOVE CRUISE CONTROL MAIN SWITCH
84633
7.REMOVE CRUISE CONTROL SWITCH WIRE
45184
8.REMOVE LOWER STEERING WHEEL BOSS COVER
Disengage the 2 pins and 4 claws to remove the lower steering wheel boss cover from the steering wheel sub-assembly.