Home › Audio / Visual / Telematics › AUDIO / VIDEO › INSTRUMENT PANEL SPEAKER
RM2070E _56 Audio / Visual / Telematics _061931 AUDIO / VIDEO _0301723 INSTRUMENT PANEL SPEAKER G

AUDIO / VIDEO  INSTRUMENT PANEL SPEAKER  INSPECTION  


PROCEDURE

Hide 86160P 1.INSPECT FRONT NO. 2 SPEAKER ASSEMBLY (for 6 Speakers)

a.

With the speaker installed, check that there is no looseness or other abnormalities.


b.

Check that there is no foreign matter in the speaker, no tears on the speaker cone or other abnormalities.


c.
E226097E07
0.094,0.079 0.248,0.226 0.154,0.147 10 *a 1.498,2.308 1.652,2.455 0.154,0.147 10 - 1.154,2.308 1.308,2.455 0.154,0.147 10 - 2.437,2.308 2.550,2.455 0.112,0.147 10 + 2.076,2.308 2.189,2.455 0.112,0.147 10 + 1.4,1.8 1.217,2.292 false 1.675,1.817 1.543,2.287 false 2.242,1.794 2.437,2.308 false 1.99,1.8 2.122,2.292 false

Measure the resistance of the speaker.

Standard Resistance:
Tester Connection Condition Specified Condition
2 (+) - 4 (-) Always 10 kΩ or higher
1 (+) - 2 (+) Always Below 1 Ω
3 (-) - 4 (-) Always Below 1 Ω


If the result is not as specified, replace the speaker.

Text in Illustration
*a Component without harness connected
(Front No. 2 Speaker Assembly)


d.

When there is a possibility that either the right or left speaker is malfunctioning, interchange the speakers and perform an inspection. If the malfunction disappears after interchanging the speakers, replace the malfunctioning speaker.

HINT:

Connect all connectors to the speakers when performing an inspection. If the result is not as specified, replace the speaker.



Hide 86160P 2.INSPECT FRONT NO. 2 SPEAKER ASSEMBLY (for 8 Speakers)

a.

With the speaker installed, check that there is no looseness or other abnormalities.


b.

Check that there is no foreign matter in the speaker, no tears on the speaker cone or other abnormalities.


c.
E187205E04
0.154,0.034 0.341,0.249 0.187,0.215 10 *a

Measure the resistance of the speaker.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 Always 10 kΩ or higher


If the result is not as specified, replace the speaker.

Text in Illustration
*a Component without harness connected
(Front No. 2 Speaker Assembly)


d.

When there is a possibility that either the right or left speaker is malfunctioning, interchange the speakers and perform an inspection. If the malfunction disappears after interchanging the speakers, replace the malfunctioning speaker.

HINT:

Connect all connectors to the speakers when performing an inspection. If the result is not as specified, replace the speaker.