Home › Audio / Visual / Telematics › AUDIO / VIDEO › RADIO ANTENNA CORD › 2014.11–2016.05
RM2070E _56 Audio / Visual / Telematics _061931 AUDIO / VIDEO _0301724 RADIO ANTENNA CORD A

AUDIO / VIDEO  RADIO ANTENNA CORD  REMOVAL  


PROCEDURE

Hide 1.REMOVE UPPER INSTRUMENT PANEL ASSEMBLY

Hide 86101 2.REMOVE ANTENNA CORD SUB-ASSEMBLY (for LHD)

a.

Disconnect the 2 connectors.

E227965


b.

Remove the bolt.


c.

Disengage the 6 clamps and remove the antenna cord sub-assembly.


Hide 86101 3.REMOVE ANTENNA CORD SUB-ASSEMBLY (for RHD)

a.

for Plug Type Antenna Cord:

i.

Disconnect the 2 connectors.

E223190


ii.

Remove the bolt.


iii.

Disengage the 6 clamps and remove the antenna cord sub-assembly.



b.

for Connector Type Antenna Cord:

i.

Disconnect the 2 connectors.

E247802


ii.

Remove the bolt.


iii.

Disengage the 6 clamps and remove the antenna cord sub-assembly.



Hide 4.REMOVE ROOF HEADLINING ASSEMBLY

Hide 86101J 5.REMOVE NO. 2 ANTENNA CORD SUB-ASSEMBLY

a.

Peel back the tape used to secure the antenna cord only to the extent that allows removal of the No. 2 antenna cord sub-assembly.

HINT:

Tape is not available as a supply part. Try to leave as much tape as possible on the roof headlining so that the tape can be reused.



b.

Remove the No. 2 antenna cord sub-assembly from the roof headlining.

E231597E03
0.76,3.083 0.917,3.229 0.156,0.146 10 false *a 0.76,7.229 0.917,7.375 0.156,0.146 10 false *a 0.448,8.573 0.604,8.719 0.156,0.146 10 false *1 0.25,4.51 0.427,4.656 0.177,0.146 10 false *B 0.25,0.354 0.427,0.5 0.177,0.146 10 false *A

Text in Illustration
*A except Glass Roof *B for Glass Roof
*1 Tape - -
*a Front - -