Home › Audio / Visual / Telematics › AUDIO / VIDEO › NOISE FILTER › 2014.11–2016.05
RM2070E _56 Audio / Visual / Telematics _061931 AUDIO / VIDEO _0301729 NOISE FILTER A

AUDIO / VIDEO  NOISE FILTER  INSTALLATION  


PROCEDURE

Hide 86011R 1.INSTALL RADIO SETTING CONDENSER

a.
E226085

Engage the claw to install a new terminal cover to the wire harness.

NOTICE:
·

Make sure to hold the wire harness on the crimping side of the terminal when installing the wire harness from the terminal cover.

·

Make sure not to bend the exposed wire when installing the wire harness to the terminal cover.

·

Do not use excessive force when inserting the wire harness into the terminal cover.

·

If the terminal cover has been deformed at installation, replace the terminal and terminal cover with new ones.




b.
E223710

Engage the 6 claws to install the 2 new terminal covers with wire harness to a new condenser.

NOTICE:
·

Do not use excessive force when inserting the terminal cover into the condenser.

·

If the terminal cover has been deformed at installation, replace the terminal, terminal cover and condenser with new ones.




c.
E226095

Engage the claw to insert the cover as shown in the illustration.


d.

Engage the clamp to temporarily install a new radio setting condenser with wire harness.


e.

Install the new radio setting condenser with the bolt.


Hide 62480A 2.INSTALL ROOF SIDE INNER GARNISH ASSEMBLY LH

Hide 64740C 3.INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH

Hide 73570 5.CONNECT REAR NO. 2 SEAT OUTER BELT ASSEMBLY LH (for Lower Side)

Hide 73370C 6.CONNECT REAR NO. 1 SEAT OUTER BELT ASSEMBLY LH

Hide 64713F 8.INSTALL FRONT DECK SIDE TRIM COVER LH

Hide 58460D 9.INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY

Hide 62332A 11.INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH

Hide 72128C 14.INSTALL SEAT TRACK BRACKET COVER LH

Hide 72159H 15.INSTALL REAR SEAT TRACK BRACKET COVER

Hide 72127D 16.INSTALL SEAT TRACK BRACKET COVER RH

Hide 64910J 18.INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)