Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM › 2012.03–2014.11
RM2070E _56 Audio / Visual / Telematics _061932 NAVIGATION / MULTI INFO DISPLAY _0301737 NAVIGATION SYSTEM J

NAVIGATION / MULTI INFO DISPLAY  NAVIGATION SYSTEM  AVC-LAN Circuit  


DESCRIPTION

Each unit of the navigation system connected to the AVC-LAN (communication bus) transfers the switch signals using the AVC-LAN.

If a short to +B or short to ground occurs in the AVC-LAN, the navigation system will not function normally because communication is not possible.

WIRING DIAGRAM

E226477E25
1.646,0.625 1.75,0.781 0.104,0.156 10 false 8 1.198,0.708 1.573,0.865 0.375,0.156 10 false ATX+ 1.646,1.417 1.75,1.573 0.104,0.156 10 false 7 5.354,0.625 5.531,0.781 0.177,0.156 10 false 11 5.354,1.417 5.531,1.573 0.177,0.156 10 false 10 1.229,1.5 1.563,1.656 0.333,0.156 10 false ATX- 3.146,0.708 3.51,0.865 0.365,0.156 10 false TX1+ 3.146,1.5 3.469,1.656 0.323,0.156 10 false TX1- 4.115,0.708 4.365,0.865 0.25,0.156 10 false L37 4.115,1.51 4.365,1.667 0.25,0.156 10 false L37 3.667,0.708 4.021,0.865 0.354,0.156 10 false TX3+ 4.198,1.313 4.292,1.469 0.094,0.156 10 false 4 2.885,1.313 2.979,1.469 0.094,0.156 10 false 8 4.198,0.521 4.292,0.677 0.094,0.156 10 false 3 2.885,0.521 2.979,0.677 0.094,0.156 10 false 7 2.802,1.5 3.063,1.656 0.26,0.156 10 false L38 2.802,0.708 3.052,0.885 0.25,0.177 10 false L38 3.698,1.5 4.021,1.656 0.323,0.156 10 false TX3- 5.615,0.708 6,0.865 0.385,0.156 10 false TX+ 5.615,1.5 5.969,1.656 0.354,0.156 10 false TX- 0.146,1.979 0.583,2.208 0.438,0.229 10 false L31 0.146,2.146 2.688,2.302 2.542,0.156 10 false Stereo Component Amplifier Assembly 5.354,2 5.708,2.156 0.354,0.156 10 false L64 5.354,2.167 6.719,2.323 1.365,0.156 10 false Parking Assist ECU 3.094,2.01 4.135,2.333 1.042,0.323 10 false Navigation ECU Sub-assembly

CAUTION / NOTICE / HINT

HINT:

The navigation ECU sub-assembly is the master unit.


PROCEDURE

1.INSPECT NAVIGATION ECU SUB-ASSEMBLY
a.
U191354E01
1.619,0.521 2.033,0.676 0.414,0.156 10 L38 1.619,2.494 2.033,2.650 0.414,0.156 10 L37 0.179,0.155 0.332,0.311 0.153,0.156 10 *a 1.217,2.019 1.536,2.174 0.319,0.156 10 TX1- 1.721,1.5 1.461,2.005 false 1.984,2.019 2.337,2.174 0.354,0.156 10 TX1+ 1.853,1.5 2.113,2.005 false 1.337,3.858 1.656,4.013 0.319,0.156 10 TX3- 1.841,3.339 1.581,3.844 false 2.121,3.858 2.475,4.013 0.354,0.156 10 TX3+ 1.99,3.339 2.25,3.844 false

Disconnect the L38 and L37 navigation ECU sub-assembly connectors.


b.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
L38-7 (TX1+) - L38-8 (TX1-) Always 60 to 80 Ω
L37-3 (TX3+) - L37-4 (TX3-) Always 60 to 80 Ω


Text in Illustration
*a Component without harness connected
(Navigation ECU Sub-assembly)



OK

2.CHECK HARNESS AND CONNECTOR (AVC-LAN CIRCUIT)

NG

2.CHECK HARNESS AND CONNECTOR (AVC-LAN CIRCUIT)
a.

Disconnect the L38 and L37 navigation ECU sub-assembly connectors.


b.

Disconnect the L31 stereo component amplifier assembly connector.


c.

Disconnect the L64 parking assist ECU connector.


d.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
L31-8 (ATX+) - L38-7 (TX1+) Always Below 1 Ω
L31-7 (ATX-) - L38-8 (TX1-) Always Below 1 Ω
L64-11 (TX+) - L37-3 (TX3+) Always Below 1 Ω
L64-10 (TX-) - L37-4 (TX3-) Always Below 1 Ω
L31-8 (ATX+) - Body ground Always 10 kΩ or higher
L31-7 (ATX-) - Body ground Always 10 kΩ or higher
L64-11 (TX+) - Body ground Always 10 kΩ or higher
L64-10 (TX-) - Body ground Always 10 kΩ or higher




OK

3.INSPECT MALFUNCTIONING PARTS

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

3.INSPECT MALFUNCTIONING PARTS
a.

Disconnect and reconnect each slave unit one by one until the master unit returns to normal operation.

HINT:
·

Check all slave units.

·

If disconnecting a slave unit causes the master unit to return to normal operation, the slave unit is defective and should be replaced.



OK:

Master unit returns to normal operation.




OK

REPLACE MALFUNCTIONING PARTS

NG