These DTCs are stored when a malfunction occurs in the navigation antenna assembly.
| DTC No. | DTC Detection Condition | Trouble Area |
|---|---|---|
| B15C0 | Navigation antenna error | ·
Antenna cord sub-assembly ·
No. 2 antenna cord sub-assembly ·
Amplifier antenna assembly ·
Navigation ECU sub-assembly |
| B15C1 | Error of the power source to the navigation antenna |
Replace the antenna cord sub-assembly (See page Audio / Visual / Telematics>AUDIO / VIDEO>RADIO ANTENNA CORD>REMOVAL).
Clear the DTCs (See page Audio / Visual / Telematics>NAVIGATION / MULTI INFO DISPLAY>NAVIGATION SYSTEM>DTC CHECK / CLEAR).
Recheck for DTCs and check if the same DTCs are output again.
No DTCs are output.
OK
NG
Replace the No. 2 antenna cord sub-assembly (See page Audio / Visual / Telematics>AUDIO / VIDEO>RADIO ANTENNA CORD>REMOVAL).
Clear the DTCs (See page Audio / Visual / Telematics>NAVIGATION / MULTI INFO DISPLAY>NAVIGATION SYSTEM>DTC CHECK / CLEAR).
Recheck for DTCs and check if the same DTCs are output again.
No DTCs are output.
OK
NG
Replace the amplifier antenna assembly (See page Audio / Visual / Telematics>AUDIO / VIDEO>AMPLIFIER ANTENNA(for Roof)>REMOVAL).
Clear the DTCs (See page Audio / Visual / Telematics>NAVIGATION / MULTI INFO DISPLAY>NAVIGATION SYSTEM>DTC CHECK / CLEAR).
Recheck for DTCs and check if the same DTCs are output again.
No DTCs are output.
OK
NG