This DTC is stored when a malfunction occurs in the stereo component amplifier assembly.
| DTC No. | DTC Detection Condition | Trouble Area |
|---|---|---|
| B15A3 | When any of the following conditions is met:
·
Internal power supply malfunction ·
DSP error ·
EEPROM error |
Stereo component amplifier assembly |
Recheck for DTCs and check that no DTCs are output.
No DTCs are output.
OK
(See pageGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING)
NG