The No. 1 stereo jack adapter assembly sends the display signal from an external device to the navigation receiver assembly via this circuit.
Disconnect the L38 navigation receiver assembly connector.
Disconnect the L174 No. 1 stereo jack adapter assembly connector.
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| L38-13 (VV+) - L174-6 (VV+) | Always | Below 1 Ω |
| L38-14 (VV-) - L174-11 (VV-) | Always | Below 1 Ω |
| L38-13 (VV+) - Body ground | Always | 10 kΩ or higher |
| L38-14 (VV-) - Body ground | Always | 10 kΩ or higher |
| L38-12 (SG) - Body ground | Always | 10 kΩ or higher |
OK
NG