Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › INTELLIGENT PARKING ASSIST SYSTEM › 2012.03–2013.08
RM2070E _56 Audio / Visual / Telematics _061933 PARK ASSIST / MONITORING _0301741 INTELLIGENT PARKING ASSIST SYSTEM C

PARK ASSIST / MONITORING  INTELLIGENT PARKING ASSIST SYSTEM  U1000  Can Communication Failure(Message Registry)  


DESCRIPTION

This DTC is stored when the parking assist ECU judges that it has an internal CAN malfunction.

DTC No. DTC Detection Condition Trouble Area
U1000 Can communication failure (message registry) Parking assist ECU

PROCEDURE

1.CHECK DTC OUTPUT

b.

Check for DTCs (See page Audio / Visual / Telematics>PARK ASSIST / MONITORING>INTELLIGENT PARKING ASSIST SYSTEM>DTC CHECK / CLEAR).

Result:
Result Proceed to
DTC U1000 is output A
DTCs are not output B


HINT:
·

If the DTC is not output again when rechecking for DTCs, it may have been stored due to a temporary CAN malfunction.

·

If DTC U1000 is output frequently, duplicate the problem symptoms and perform the inspection again, even though the DTC is not output when rechecking for DTCs (See page General>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING).





A

B