This DTC is stored when the parking assist ECU receives a hybrid control system malfunction signal from the hybrid control system via CAN communication.
| DTC No. | DTC Detection Condition | Trouble Area |
|---|---|---|
| C1657 | Powertrain system malfunction | Hybrid control system |
Clear the DTCs (See page Audio / Visual / Telematics>PARK ASSIST / MONITORING>INTELLIGENT PARKING ASSIST SYSTEM>DTC CHECK / CLEAR).
Check for DTCs (See page Audio / Visual / Telematics>PARK ASSIST / MONITORING>INTELLIGENT PARKING ASSIST SYSTEM>DTC CHECK / CLEAR).
| Result | Proceed to |
|---|---|
| DTC C1657 is output | A |
| DTCs are not output | B |
The DTC is stored when a malfunction occurs in the hybrid control system.
If troubleshooting and repair of a malfunction in the hybrid control system has been completed, DTC C1657 will not be output again when rechecking for DTCs.
If DTC C1657 is output frequently, duplicate the problem symptoms and perform the inspection again, even though the DTCs are not output when rechecking for DTCs (See page General>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING).
A
B
(See pageGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING)