Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › REAR VIEW MONITOR SYSTEM › 2014.11–2016.05
RM2070E _56 Audio / Visual / Telematics _061933 PARK ASSIST / MONITORING _0301742 REAR VIEW MONITOR SYSTEM D

PARK ASSIST / MONITORING  REAR VIEW MONITOR SYSTEM  SYSTEM DESCRIPTION  


GENERAL


a.

To assist the driver with parking the vehicle by displaying an image of the area behind the vehicle, this system has a rear television camera assembly mounted on the back door. The system displays the image on the multi-display.


b.

The rear view monitor system consists of the following components:

i.

Rear television camera assembly


ii.

Navigation receiver assembly*1


iii.

Radio and display receiver assembly*2


iv.

No. 1 integration relay


v.

Power management control ECU




*1: for Navigation Receiver Type

*2: for Radio and Display Type


FUNCTION OF COMPONENTS


Item Function
Rear Television Camera Assembly
·

Mounted on the back door to transmit an image of the area behind the vehicle to the navigation receiver assembly*1 or radio and display receiver assembly*2.

·

Has a color video camera that uses a Complementary Metal Oxide Semiconductor (CMOS) and a wide-angle lens.


Navigation Receiver Assembly*1
Radio and Display Receiver Assembly*2
·

Receives video signals, which contain an image of the area behind the vehicle taken with the rear television camera assembly.

·

Performs control of the system by receiving the reverse signal from the No. 1 integration relay.


No. 1 Integration Relay Transmits a reverse signal to the navigation receiver assembly*1 or radio and display receiver assembly*2.
Power Management Control ECU Transmits a reverse signal to the No. 1 integration relay.

*1: for Navigation Receiver Type

*2: for Radio and Display Type



OPERATION EXPLANATION


a.

The navigation receiver assembly*1 or radio and display receiver assembly*2 receives the reverse signal when the power switch is on (IG) and the shift lever is moved to R. After receiving the reverse signal, the navigation receiver assembly*1 or radio and display receiver assembly*2 switches to the rear view monitor system.

*1: for Navigation Receiver Type

*2: for Radio and Display Type