GENERAL
To assist the driver with parking the vehicle by displaying an image of the area behind the vehicle, this system has a rear television camera assembly mounted on the back door. The system displays the image on the multi-display.
The rear view monitor system consists of the following components:
Rear television camera assembly
Navigation receiver assembly*1
Radio and display receiver assembly*2
No. 1 integration relay
Hybrid vehicle control ECU
*1: for Navigation Receiver Type
*2: for Radio and Display Type
FUNCTION OF COMPONENTS
| Item | Function |
|---|---|
| Rear Television Camera Assembly | ·
Mounted on the back door to transmit an image of the area behind the vehicle to the navigation receiver assembly*1 or radio and display receiver assembly*2. ·
Has a color video camera that uses a Complementary Metal Oxide Semiconductor (CMOS) and a wide-angle lens. |
| Navigation Receiver Assembly*1
Radio and Display Receiver Assembly*2 |
·
Receives video signals, which contain an image of the area behind the vehicle taken with the rear television camera assembly. ·
Performs control of the system by receiving the reverse signal from the No. 1 integration relay. |
| No. 1 Integration Relay | Transmits a reverse signal to the navigation receiver assembly*1 or radio and display receiver assembly*2. |
| Hybrid Vehicle Control ECU | Transmits a reverse signal to the No. 1 integration relay. |
*1: for Navigation Receiver Type
*2: for Radio and Display Type
OPERATION EXPLANATION
The navigation receiver assembly*1 or radio and display receiver assembly*2 receives the reverse signal when the power switch is on (IG) and the shift lever is moved to R. After receiving the reverse signal, the navigation receiver assembly*1 or radio and display receiver assembly*2 switches to the rear view monitor system.
*1: for Navigation Receiver Type
*2: for Radio and Display Type