84490F
1.INSPECT PARKING ASSIST PRE SUPPORT SWITCH ASSEMBLY
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 3 (E) - 6 (IG) | Parking assist pre support switch assembly pushed in | Below 1 Ω |
| Parking assist pre support switch assembly not pushed | 10 kΩ or higher |
| *a | Component without harness connected
(Parking Assist Pre Support Switch Assembly) |
If the result is not as specified, replace the parking assist pre support switch assembly.