Home › Vehicle Interior › DOOR LOCK › FRONT DOOR LOCK › 2012.03–2014.11
RM2070E _58 Vehicle Interior _061937 DOOR LOCK _0301761 FRONT DOOR LOCK G

DOOR LOCK  FRONT DOOR LOCK  INSPECTION  


PROCEDURE

Hide 69320 1.INSPECT FRONT DOOR LOCK ASSEMBLY LH (w/o Double Locking System)

a.
B171377E21
2.149,3.55 2.297,3.692 0.149,0.142 10 *c 2.672,3.202 2.821,3.344 0.149,0.142 10 *b 0.087,0.096 0.243,0.242 0.156,0.147 10 *a 0.281,2.969 0.377,3.107 0.096,0.139 10 L 1.401,3.801 1.401,3.049 1.401,3.049 1.213,3.049 false 0.593,3.801 0.593,3.049 0.593,3.049 0.405,3.049 false 1.003,2.969 1.198,3.107 0.195,0.139 10 UL

Check the operation of the door lock motor.

i.

Apply auxiliary battery voltage and check the operation of the door lock motor.

OK:
Connection Result
Auxiliary battery positive (+) → Terminal 4 (L)
Auxiliary battery negative (-) → Terminal 1 (UL)
Locks
Auxiliary battery positive (+) → Terminal 1 (UL)
Auxiliary battery negative (-) → Terminal 4 (L)
Unlocks


Text in Illustration
*a Component without harness connected
(Front Door Lock Assembly LH)
*b Unlock
*c Lock

If the result is not as specified, replace the front door lock assembly LH.



b.
B171377E22
2.167,3.566 2.316,3.708 0.149,0.142 10 *c 2.687,3.201 2.836,3.343 0.149,0.142 10 *b 0.087,0.094 0.243,0.241 0.156,0.147 10 *a 1.076,4.193 1.076,4.55 1.076,4.55 1.312,4.55 false 1.336,4.463 1.451,4.600 0.114,0.137 10 E 0.91,4.193 0.91,4.55 0.91,4.55 0.705,4.55 false 0.225,4.463 0.610,4.600 0.385,0.137 10 LSSR

Check the operation of the door unlock detection switch.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
7 (E) - 8 (LSSR) Locked 10 kΩ or higher
7 (E) - 8 (LSSR) Unlocked Below 1 Ω


Text in Illustration
*a Component without harness connected
(Front Door Lock Assembly LH)
*b Unlock
*c Lock

If the result is not as specified, replace the front door lock assembly LH.



c.
B273324E06
2.74,3.531 2.74,3.875 2.74,3.875 2.854,3.875 false 2.427,3.531 2.427,4.094 2.427,4.094 2.854,4.094 false 2.271,3.531 2.271,4.094 2.271,4.094 2.083,4.094 false 2.771,2.052 2.917,2.198 0.146,0.146 10 false *b 2.99,0.969 3.135,1.115 0.146,0.146 10 false *c 0.063,0.063 0.208,0.208 0.146,0.146 10 false *a 2.885,3.813 3,3.948 0.115,0.135 10 false E 2.896,4.042 2.99,4.177 0.094,0.135 10 false L 1.885,4.021 2.146,4.271 0.26,0.25 10 false UL

Check the operation of the door key lock and unlock switch. (for LHD)

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
9 (L) - 7 (E) Turned to lock Below 1 Ω
9 (L) - 7 (E) Not turned 10 kΩ or higher
10 (UL) - 7 (E) Turned to unlock Below 1 Ω
10 (UL) - 7 (E) Not turned 10 kΩ or higher


Text in Illustration
*a Component without harness connected
(Front Door Lock Assembly LH)
*b Unlock
*c Lock

If the result is not as specified, replace the front door lock assembly LH.



Hide 69320 2.INSPECT FRONT DOOR LOCK ASSEMBLY LH (w/ Double Locking System)

a.
B164418E09
0.081,0.049 0.230,0.186 0.149,0.137 10 *a 2.745,3.322 2.895,3.460 0.150,0.139 10 *b 2.23,3.735 2.380,3.875 0.150,0.140 10 *c 0.641,3.835 0.641,2.843 0.641,2.843 0.717,2.843 false 0.417,3.835 0.417,2.843 0.417,2.843 0.32,2.843 false 0.204,2.757 0.299,2.905 0.095,0.147 10 L 0.747,2.755 0.947,2.903 0.199,0.147 10 UL 0.812,3.832 0.812,3.136 0.812,3.136 0.889,3.136 false 0.919,3.048 1.118,3.195 0.199,0.147 10 DL 1.486,3.804 1.939,3.951 0.453,0.147 10 UNDL 1.14,3.896 1.471,3.896 false

Check the operation of the door lock motor and double lock motor.

i.

Apply auxiliary battery voltage and check the operation of the door lock motor and double lock motor.

OK:
Connection Result
Auxiliary battery positive (+) → 4 (L)
Auxiliary battery negative (-) → 3 (UL)
Locks
Auxiliary battery positive (+) → 3 (UL)
Auxiliary battery negative (-) → 4 (L)
Unlocks
Auxiliary battery positive (+) → 2 (DL)
Auxiliary battery negative (-) → 1 (UNDL)
Sets
Auxiliary battery positive (+) → 1 (UNDL)
Auxiliary battery negative (-) → 2 (DL)
Unsets


Text in Illustration
*a Component without harness connected
(Front Door Lock Assembly LH)
*b Unlock
*c Lock

HINT:
·

Move the door lock motor to the lock position and set the double locking system. Check that the doors cannot be unlocked by operating the control cable.

·

Move the door lock motor to the lock position and unset the double locking system. Check that the doors can be unlocked by operating the control cable.



If the result is not as specified, replace the front door lock assembly LH.



b.
B164418E10
0.081,0.058 0.230,0.195 0.149,0.137 10 *a 2.733,3.336 2.883,3.475 0.150,0.139 10 *b 2.23,3.743 2.380,3.883 0.150,0.140 10 *c 0.83,4.142 0.83,4.555 0.83,4.555 1.019,4.555 false 0.666,4.142 0.666,4.469 0.666,4.469 0.59,4.469 false 0.118,4.399 0.498,4.541 0.380,0.142 10 LSSR 1.05,4.485 1.163,4.625 0.112,0.140 10 E 1.428,4.004 1.541,4.144 0.112,0.140 10 E 1.377,4.313 1.860,4.453 0.483,0.140 10 DLSR 1.346,4.383 0.984,4.383 0.984,4.383 0.984,4.128 false 1.176,4.078 1.42,4.078 false

Check the operation of the door unlock detection switch and double lock position switch.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
8 (LSSR) - 7 (E) Locked 10 kΩ or higher
8 (LSSR) - 7 (E) Unlocked Below 1 Ω
6 (DLSR) - 5 (E) Unset 10 kΩ or higher
6 (DLSR) - 5 (E) Set Below 1 Ω


Text in Illustration
*a Component without harness connected
(Front Door Lock Assembly LH)
*b Unlock
*c Lock

If the result is not as specified, replace the front door lock assembly LH.



Hide 69310 3.INSPECT FRONT DOOR LOCK ASSEMBLY RH (w/o Double Locking System)

a.
B171378E23
0.07,0.063 0.226,0.206 0.156,0.143 10 *a 1.153,3.639 1.302,3.776 0.149,0.137 10 *c 0.61,3.233 0.758,3.370 0.149,0.137 10 *b 2.872,3.822 2.872,3.159 2.872,3.159 3.041,3.159 false 3.064,3.073 3.264,3.210 0.199,0.137 10 UL 2.081,3.822 2.081,3.159 2.081,3.159 2.25,3.159 false 2.274,3.073 2.369,3.210 0.095,0.137 10 L

Check the operation of the door lock motor.

i.

Apply auxiliary battery voltage and check the operation of the door lock motor.

OK:
Connection Result
Auxiliary battery positive (+) → Terminal 4 (L)
Auxiliary battery negative (-) → Terminal 1 (UL)
Locks
Auxiliary battery positive (+) → Terminal 1 (UL)
Auxiliary battery negative (-) → Terminal 4 (L)
Unlocks


Text in Illustration
*a Component without harness connected
(Front Door Lock Assembly RH)
*b Unlock
*c Lock

If the result is not as specified, replace the front door lock assembly RH.



b.
B273325E01
0.07,0.055 0.226,0.198 0.156,0.143 10 *a 1.107,3.18 1.256,3.317 0.149,0.137 10 *c 0.577,2.747 0.726,2.885 0.149,0.137 10 *b 2.3,3.756 2.3,4.121 2.3,4.121 2.181,4.121 false 2.463,3.756 2.463,4.121 2.463,4.121 2.57,4.121 false 2.042,4.039 2.153,4.181 0.111,0.142 10 E 2.613,4.031 2.995,4.173 0.382,0.142 10 LSSR

Check the operation of the door unlock detection switch.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
7 (LSSR) - 8 (E) Locked 10 kΩ or higher
7 (LSSR) - 8 (E) Unlocked Below 1 Ω


Text in Illustration
*a Component without harness connected
(Front Door Lock Assembly RH)
*b Unlock
*c Lock

If the result is not as specified, replace the front door lock assembly RH.



c.
B284859E12
0.75,3.427 0.75,4.438 0.75,4.438 0.906,4.438 false 1.052,3.427 1.052,4.135 1.052,4.135 1.208,4.135 false 1.208,3.427 1.208,3.823 1.208,3.823 1.365,3.823 false 0.958,4.354 1.104,4.51 0.146,0.156 10 false E 1.26,4.042 1.375,4.198 0.115,0.156 10 false L 1.406,3.729 1.615,3.885 0.208,0.156 10 false UL 0.104,0.063 0.25,0.229 0.146,0.167 10 false *a 0.573,1.615 0.719,1.781 0.146,0.167 10 false *b 0.344,0.573 0.49,0.74 0.146,0.167 10 false *c

Check the resistance of the door lock and unlock switch. (for RHD)

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
6 (L) - 8 (E) Turned to lock Below 1 Ω
Not turned 10 kΩ or higher
5 (UL) - 8 (E) Turned to unlock Below 1 Ω
Not turned 10 kΩ or higher


Text in Illustration
*a Component without harness connected
(Front Door Lock Assembly RH)
*b Unlock
*c Lock

If the result is not as specified, replace the front door lock assembly RH.



Hide 69310 4.INSPECT FRONT DOOR LOCK ASSEMBLY RH (w/ Double Locking System)

a.
B164417E08
2.339,3.862 2.339,2.11 2.339,2.11 2.903,2.11 false 0.111,0.05 0.260,0.196 0.149,0.147 10 *a 0.417,3.264 0.596,3.424 0.179,0.161 10 *b 0.974,3.774 1.152,3.934 0.178,0.161 10 *c 2.783,3.862 2.783,2.871 2.783,2.871 3.141,2.871 false 2.563,3.862 2.563,2.528 2.563,2.528 2.904,2.528 false 3.01,3.862 3.01,3.141 3.01,3.141 3.141,3.141 false 3.164,3.063 3.362,3.204 0.198,0.141 10 UL 3.164,2.795 3.260,2.936 0.096,0.141 10 L 2.93,2.449 3.326,2.587 0.395,0.139 10 UNDL 2.93,2.037 3.128,2.178 0.198,0.141 10 DL

Check the operation of the door lock motor and double lock motor.

i.

Apply auxiliary battery voltage and check the operation of the door lock motor and double lock motor.

OK:
Connection Result
Auxiliary battery positive (+) → 2 (L)
Auxiliary battery negative (-) → 1 (UL)
Locks
Auxiliary battery positive (+) → 1 (UL)
Auxiliary battery negative (-) → 2 (L)
Unlocks
Auxiliary battery positive (+) → 4 (DL)
Auxiliary battery negative (-) → 3 (UNDL)
Sets
Auxiliary battery positive (+) → 3 (UNDL)
Auxiliary battery negative (-) → 4 (DL)
Unsets


Text in Illustration
*a Component without harness connected
(Front Door Lock Assembly RH)
*b Unlock
*c Lock

HINT:
·

Move the door lock motor to the lock position and set the double locking system. Check that the doors cannot be unlocked by operating the control cable.

·

Move the door lock motor to the lock position and unset the double locking system. Check that the doors can be unlocked by operating the control cable.



If the result is not as specified, replace the front door lock assembly RH.



b.
B273326E01
0.111,0.076 0.260,0.222 0.149,0.147 10 *a 0.457,2.816 0.636,2.976 0.179,0.161 10 *b 1.043,3.262 1.221,3.423 0.178,0.161 10 *c 2.292,3.71 2.292,4.004 2.292,4.004 1.779,4.004 false 2.447,3.71 2.447,4.262 2.447,4.262 1.779,4.262 false 2.586,3.71 2.586,4.508 2.586,4.508 1.774,4.508 false 2.741,3.71 2.741,4.058 2.741,4.058 2.946,4.058 false 2.968,3.983 3.348,4.123 0.380,0.140 10 LSSR 1.64,4.437 1.752,4.577 0.112,0.140 10 E 1.298,4.183 1.687,4.323 0.389,0.140 10 DLSR 1.64,3.937 1.752,4.077 0.112,0.140 10 E

Check the operation of the door unlock detection switch and double lock position switch.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
7 (LSSR) - 8 (E) Locked 10 kΩ or higher
7 (LSSR) - 8 (E) Unlocked Below 1 Ω
9 (DLSR) - 10 (E) Unset 10 kΩ or higher
9 (DLSR) - 10 (E) Set Below 1 Ω


Text in Illustration
*a Component without harness connected
(Front Door Lock Assembly RH)
*b Unlock
*c Lock

If the result is not as specified, replace the front door lock assembly RH.



c.
B259282E02
0.082,0.074 0.231,0.214 0.149,0.140 10 *a 0.821,2.43 0.970,2.572 0.149,0.142 10 *c 1.208,1.021 1.357,1.163 0.149,0.142 10 *b 1.007,3.988 1.007,4.42 1.007,4.42 0.886,4.42 false 1.325,3.988 1.325,4.523 1.325,4.523 1.652,4.523 false 1.471,3.988 1.471,4.286 1.471,4.286 1.652,4.286 false 1.678,4.211 1.887,4.348 0.209,0.137 10 UL 1.678,4.445 1.780,4.583 0.103,0.137 10 L 0.752,4.337 0.864,4.474 0.111,0.137 10 E

Check the operation of the door key lock and unlock switch. (for RHD)

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
6 (L) - 8 (E) Turned to lock Below 1 Ω
6 (L) - 8 (E) Not turned 10 kΩ or higher
5 (UL) - 8 (E) Turned to unlock Below 1 Ω
5 (UL) - 8 (E) Not turned 10 kΩ or higher


Text in Illustration
*a Component without harness connected
(Front Door Lock Assembly RH)
*b Unlock
*c Lock

If the result is not as specified, replace the front door lock assembly RH.