Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › ENGINE IMMOBILISER SYSTEM › 2012.03–2016.05
RM2070E _58 Vehicle Interior _061938 THEFT DETERRENT / KEYLESS ENTRY _0301769 ENGINE IMMOBILISER SYSTEM C

THEFT DETERRENT / KEYLESS ENTRY  ENGINE IMMOBILISER SYSTEM  B279C  Theft Deterrent System Presence Detection  


DESCRIPTION

This code is stored when a power management control ECU that is incompatible with the engine immobiliser system is installed to the vehicle.

DTC Code DTC Detection Condition Trouble Area DTC Output Confirmation Operation
B279C A power management control ECU that is incompatible with the engine immobiliser system is installed (1 trip detection logic*). Power management control ECU Check for DTCs.

*: Only output while a malfunction is present.


Vehicle Condition and Fail-safe Operation when Malfunction Detected
Vehicle Condition when Malfunction Detected Fail-safe Operation when Malfunction Detected
Hybrid control system cannot be started -

Related Data List and Active Test
DTC Code Data List and Active Test
B279C -

PROCEDURE

1.REPLACE POWER MANAGEMENT CONTROL ECU
a.

Replace the current power management control ECU with a compatible power management control ECU (See page Power Source / Network>POWER DISTRIBUTION>POWER MANAGEMENT CONTROL ECU>REMOVAL).



NEXT

END