Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › ENGINE HOOD COURTESY SWITCH
RM2070E _58 Vehicle Interior _061938 THEFT DETERRENT / KEYLESS ENTRY _0301771 ENGINE HOOD COURTESY SWITCH A

THEFT DETERRENT / KEYLESS ENTRY  ENGINE HOOD COURTESY SWITCH  INSTALLATION  


PROCEDURE

Hide 53510 1.INSTALL ENGINE HOOD COURTESY SWITCH (HOOD LOCK ASSEMBLY)

a.
B274633

Apply MP grease to the sliding areas of the lock.


b.
B274631

Temporarily install the engine hood courtesy switch (hood lock assembly) as shown in the illustration.


c.

Install the engine hood courtesy switch (hood lock assembly) with the 3 bolts.

Torque:
7.5 N*m (76 kgf*cm, 66 in.*lbf)


d.

Connect the hood lock control cable assembly.


e.

Connect the connector.


Hide 53301 3.ADJUST HOOD SUB-ASSEMBLY