Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › SECURITY HORN ASSEMBLY(except Built-in Battery type)
RM2070E _58 Vehicle Interior _061938 THEFT DETERRENT / KEYLESS ENTRY _0301772 SECURITY HORN ASSEMBLY(except Built-in Battery type) G

THEFT DETERRENT / KEYLESS ENTRY  SECURITY HORN ASSEMBLY(except Built-in Battery type)  INSPECTION  


PROCEDURE

Hide 86510A 1.INSPECT SECURITY HORN ASSEMBLY

a.
B229080

Check the operation of the horn.

Standard:
Measurement Condition Specified Condition
Auxiliary battery positive (+) → Terminal 1 Horn sounds
Auxiliary battery negative (-) → Horn body


If the result is not as specified, replace the security horn assembly.