Home › Vehicle Interior › LIGHTING (INT) › VANITY LIGHT › 2012.03–2014.11
RM2070E _58 Vehicle Interior _061939 LIGHTING (INT) _0301779 VANITY LIGHT A

LIGHTING (INT)  VANITY LIGHT  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure described below is for the LH side.



PROCEDURE

Hide 1.DISCONNECT ROOF HEADLINING ASSEMBLY

Hide 81340 2.REMOVE VANITY LIGHT ASSEMBLY

a.
E189669E01
0.509,0.166 0.669,0.318 0.160,0.153 10 *1 1.076,0.982 0.693,0.289 0.693,0.289 1.211,0.677 false 2.77,1.698 2.930,1.851 0.160,0.153 10 *2 2.434,1.61 2.738,1.762 false 0.459,1.466 0.618,1.618 0.160,0.153 10 *3 0.839,1.15 0.616,1.463 false 1.806,0.194 1.966,0.346 0.160,0.153 10 *4 2,0.281 2.442,0.341 false

Tilt the tab to disengage the 2 claws <A> and separate the bulb holder from the vanity light as shown in the illustration.

Text in Illustration
*1 Claw <A>
*2 Claw <B>
*3 Bulb Holder
*4 Tab


b.

Disengage the claw <B> and remove the vanity light assembly.