81260C
1.INSTALL MAP LIGHT BULB
Install the 2 map light bulbs to the 2 map light sockets.
Turn the 2 map light sockets with the 2 map light bulbs in the direction indicated by the arrows in the illustration and install them as a unit.
81260A
2.INSTALL MAP LIGHT ASSEMBLY (except Glass Roof)
Connect the connector.
Engage the 2 guides and 4 clips to install the map light assembly.
81260A
3.INSTALL MAP LIGHT ASSEMBLY (for Glass Roof)
Connect the connector.
Engage the 3 guides and 2 clips to install the map light assembly.