Home › Vehicle Interior › LIGHTING (INT) › ROOM LIGHT
RM2070E _58 Vehicle Interior _061939 LIGHTING (INT) _0301781 ROOM LIGHT A

LIGHTING (INT)  ROOM LIGHT  REMOVAL  


PROCEDURE

Hide 81240 1.REMOVE NO. 1 ROOM LIGHT ASSEMBLY

a.
E228309E02
2.04,0.885 1.017,0.885 false 0.832,0.794 0.988,0.954 0.156,0.160 10 *1 1.968,0.01 2.124,0.170 0.156,0.160 10 *a

Using a screwdriver with its tip wrapped with protective tape, disengage the 4 claws and remove the No. 1 room light lens.

Text in Illustration
*1 Protective Tape
*a Front


b.
E228310E02
1.334,1.724 1.086,1.217 false 1.28,1.744 1.437,1.904 0.156,0.160 10 *1 2.454,0.369 2.610,0.529 0.156,0.160 10 *a

Using a screwdriver with its tip wrapped with protective tape, disengage the 4 claws as shown in the illustration and remove the No. 1 room light housing.

Text in Illustration
*1 Protective Tape
*a Front


c.
E220648E03
1.473,0.872 1.779,0.566 false 1.795,0.47 1.979,0.637 0.184,0.167 10 *1

Using a screwdriver, disengage the 4 claws and disconnect the room light switch base from the No. 1 room light housing.

Text in Illustration
*1 Room Light Switch Base