81080L
1.INSPECT FOOTWELL LIGHT (NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY LH)
Connect a positive (+) lead from the auxiliary battery to terminal 1 and a negative (-) lead to terminal 2.
Check that the footwell light comes on.
Footwell light comes on.
| *a | Component without harness connected
(Footwell Light (No. 1 Interior Illumination Light Assembly LH)) |
If the result is not as specified, replace the footwell light (No. 1 interior illumination light assembly LH).
81080H
2.INSPECT FOOTWELL LIGHT (NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY RH)
Connect a positive (+) lead from the auxiliary battery to terminal 1 and a negative (-) lead to terminal 2.
Check that the footwell light comes on.
Footwell light comes on.
| *a | Component without harness connected
(Footwell Light (No. 1 Interior Illumination Light Assembly RH)) |
If the result is not as specified, replace the footwell light (No. 1 interior illumination light assembly RH).