Home › Vehicle Interior › LIGHTING (INT) › LIGHTING SYSTEM › 2014.11–2016.05
RM2070E _58 Vehicle Interior _061939 LIGHTING (INT) _0301790 LIGHTING SYSTEM U

LIGHTING (INT)  LIGHTING SYSTEM  TERMINALS OF ECU  


CHECK INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY AND MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU)


U191253E02
1.771,0.573 1.625,0.573 1.625,0.573 1.625,0.854 false 1.552,1.406 1.458,1.406 1.458,1.406 1.458,3.167 false 0.677,2.677 1.021,2.677 false 3.406,7.885 3.667,8.042 0.26,0.156 10 false MB 5.031,6.625 5.292,6.781 0.26,0.156 10 false 2A 1.781,6.583 2.042,6.74 0.26,0.156 10 false 2B 5.063,5.25 5.323,5.406 0.26,0.156 10 false 2C 1.792,5.281 2.052,5.438 0.26,0.156 10 false 2D 4.688,3.969 4.948,4.125 0.26,0.156 10 false 2E 4.979,3.969 5.24,4.125 0.26,0.156 10 false *B 5.656,3.979 5.917,4.135 0.26,0.156 10 false *C 5.354,3.969 5.615,4.125 0.26,0.156 10 false 2F 1.813,3.938 2.073,4.094 0.26,0.156 10 false L7 0.219,2.448 0.479,2.604 0.26,0.156 10 false 2E 0.521,2.448 0.781,2.604 0.26,0.156 10 false *B 0.521,2.74 0.781,2.896 0.26,0.156 10 false *C 0.229,2.74 0.49,2.896 0.26,0.156 10 false 2F 0.417,1.302 0.677,1.458 0.26,0.156 10 false 2D 0.417,2.052 0.677,2.208 0.26,0.156 10 false 2C 1.938,1.438 2.198,1.594 0.26,0.156 10 false L7 1.823,0.5 1.979,0.656 0.156,0.156 10 false *1 3.698,0.552 3.958,0.708 0.26,0.156 10 false MB 6.333,2.083 6.594,2.24 0.26,0.156 10 false 2A 6.323,1.406 6.583,1.563 0.26,0.156 10 false 2B 0.365,0.104 0.625,0.302 0.26,0.198 10 false *A 1.385,3.198 1.542,3.354 0.156,0.156 10 false *2

Text in Illustration
*A Main Body ECU (Multiplex Network Body ECU) with 1 connector *B for LHD
*C for RHD - -
*1 Main Body ECU (Multiplex Network Body ECU) *2 1 connector

U190870E02
1.781,0.677 1.625,0.677 1.625,0.677 1.625,0.958 false 1.542,1.406 1.458,1.406 1.458,1.406 1.458,3.281 false 1.552,1.698 1.469,1.698 false 1.552,2.052 1.469,2.052 false 0.708,2.781 1.031,2.781 false 3.156,7.594 3.448,7.76 0.292,0.167 10 false MB 4.875,6.385 5.167,6.552 0.292,0.167 10 false 2A 1.885,6.385 2.177,6.552 0.292,0.167 10 false 2B 1.167,5.115 1.458,5.281 0.292,0.167 10 false 2D 0.531,1.5 0.823,1.667 0.292,0.167 10 false 2D 3.927,5.135 4.219,5.302 0.292,0.167 10 false 2C 0.521,2.167 0.813,2.333 0.292,0.167 10 false 2C 4.875,3.802 5.167,3.969 0.292,0.167 10 false L7 6.26,5.104 6.552,5.271 0.292,0.167 10 false 2F 5.594,5.115 5.885,5.281 0.292,0.167 10 false 2E 5.875,5.115 6.083,5.281 0.208,0.167 10 false *B 6.552,5.115 6.76,5.281 0.208,0.167 10 false *C 2.438,3.813 2.729,3.979 0.292,0.167 10 false L8 0.271,2.563 0.563,2.729 0.292,0.167 10 false 2E 0.552,2.583 0.844,2.75 0.292,0.167 10 false *B 0.563,2.854 0.854,3.021 0.292,0.167 10 false *C 0.271,2.854 0.563,3.021 0.292,0.167 10 false 2F 2.01,1.698 2.302,1.865 0.292,0.167 10 false L7 2.01,2.063 2.302,2.229 0.292,0.167 10 false L8 6.271,1.542 6.479,1.708 0.208,0.167 10 false 2B 3.729,0.635 4.021,0.802 0.292,0.167 10 false MB 6.271,2.198 6.479,2.365 0.208,0.167 10 false 2A 1.823,0.583 1.979,0.74 0.156,0.156 10 false *1 0.375,0.198 0.635,0.396 0.26,0.198 10 false *A 1.365,3.313 1.521,3.469 0.156,0.156 10 false *2

Text in Illustration
*A Main Body ECU (Multiplex Network Body ECU) with 3 connectors *B for LHD
*C for RHD - -
*1 Main Body ECU (Multiplex Network Body ECU) *2 3 connectors

a.

Disconnect the 2B, 2C, 2E and L8 instrument panel junction block assembly and main body ECU (multiplex network body ECU) connectors.


b.

Measure the voltage according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
2C-18 - Body ground Y - Body ground Auxiliary battery power supply Power switch off 11 to 14 V
2E-1 - Body ground*2 W - Body ground Auxiliary battery power supply Power switch off 11 to 14 V
2F-1 - Body ground*3 W - Body ground Auxiliary battery power supply Power switch off 11 to 14 V

If the result is not as specified, there may be a malfunction in the wire harness.


c.

Measure the resistance according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
2B-4 - Body ground W-B - Body ground Ground Always Below 1 Ω
2B-6 - Body ground W-B - Body ground Ground Always Below 1 Ω
L8-3 (GND2) - Body ground*4 W-B - Body ground Ground Always Below 1 Ω

If the result is not as specified, there may be a malfunction in the wire harness.


d.

Reconnect the 2B, 2C, 2E and L8 instrument panel junction block assembly and main body ECU (multiplex network body ECU) connectors.


e.

Measure the voltage and check for pulses according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
2A-43 - Body ground G - Body ground ACC power supply Power switch on (ACC) 11 to 14 V
Power switch off Below 1 V
2B-25 - Body ground B - Body ground IG power supply Power switch on (IG) 11 to 14 V
Power switch off Below 1 V
2A-20 - Body ground Y - Body ground Light cut relay drive output Light cut relay off 11 to 14 V
Light cut relay on Below 1 V
2A-52 - Body ground P - Body ground Interior lights drive output Power switch off, interior lights off (when operated by illuminated system) 11 to 14 V
Power switch off, interior lights on (when operated by illuminated system) Below 1 V
2B-17 - Body ground*1 Y - Body ground*2
L - Body ground*3
Footwell light RH drive output Footwell light RH off 11 to 14 V
Footwell light RH on Below 1 V
2B-18 - Body ground*1 L - Body ground Footwell light LH drive output Footwell light LH off 11 to 14 V
Footwell light LH on Below 1 V
2B-13 - Body ground Y - Body ground Courtesy light (LH) drive output Courtesy light (LH) off 11 to 14 V
Courtesy light (LH) on Below 1 V
2B-31 - Body ground L - Body ground Courtesy light (RH) drive output Courtesy light (RH) off 11 to 14 V
Courtesy light (RH) on Below 1 V
2D-35 - Body ground Y - Body ground*2
V - Body ground*3
Front door courtesy light switch LH input Front door LH open Below 1 V
Front door LH closed 11 to 14 V
2D-36 - Body ground BR - Body ground*2
V - Body ground*3
Front door courtesy light switch RH input Front door RH open Below 1 V
Front door RH closed 11 to 14 V
L7-6 (LRCY) - Body ground G - Body ground Rear door courtesy light switch RH and LH input Rear door RH or LH open Below 1 V
Rear door RH and LH closed Pulse generation
L7-19 (BCTY) - Body ground L - Body ground Back door courtesy light switch input Back door open Below 1 V
Back door closed and luggage compartment light switch on 11 to 14 V
Back door closed and luggage compartment light switch off Pulse generation
L7-7 (LSFL) - Body ground GR - Body ground Front door unlock detection switch LH input Front door LH locked Pulse generation
Front door LH unlocked Below 1 V
L7-18 (LSFR) - Body ground LG - Body ground Front door unlock detection RH switch input Front door RH locked Pulse generation
Front door RH unlocked Below 1 V
2D-25 - Body ground GR - Body ground Rear door unlock detection switch LH input Rear door LH and RH locked Pulse generation
Rear door LH or RH unlocked Below 1 V
2B-29 - Body ground GR - Body ground Rear door unlock detection switch RH input Rear door LH and RH locked Pulse generation
Rear door LH or RH unlocked Below 1 V

*1: w/ Footwell Light

*2: for LHD

*3: for RHD

*4: Main Body ECU (multiplex network body ECU) with 3 connectors

If the result is not as specified, the main body ECU (multiplex network body ECU) or instrument panel junction block assembly may have a malfunction.




CHECK CERTIFICATION ECU (SMART KEY ECU ASSEMBLY)


U154537E03
2.458,0.552 2.74,0.698 0.281,0.146 10 false L62 4.698,0.552 4.979,0.698 0.281,0.146 10 false L63

a.

Measure the voltage and check for pulses according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
L62-11 (SWIL) - Body ground G - Body ground Power switch illumination drive output Power switch illumination on 11 to 14 V or pulse generation
Power switch illumination off Below 1 V

If the result is not as specified, the certification ECU (smart key ECU assembly) may have a malfunction.