When disassembling the combination meter sub-assembly, eliminate static electricity by touching the vehicle body to prevent components from being damaged.
83138G
1.REMOVE COMBINATION METER GLASS
Remove the 2 screws.
Disengage the 8 claws and remove the combination meter glass.
2.REMOVE NO. 2 COMBINATION METER COVER (w/ Multi-information Display)
Remove the 2 screws.
Disengage the 10 claws and remove the No. 2 combination meter cover.
3.REMOVE NO. 1 COMBINATION METER LENS (w/ Multi-information Display)
Disengage the 2 guides and remove the No. 1 combination meter lens.
83821A
4.REMOVE NO. 1 COMBINATION METER COVER
Remove the 8 screws.
Disengage the 4 claws and remove the No. 1 combination meter cover.
83247
5.REMOVE METER CIRCUIT PLATE (w/o Multi-information Display)
Remove the meter circuit plate.