When reassembling the combination meter sub-assembly, eliminate static electricity by touching the vehicle body to prevent components from being damaged.
83247
1.INSTALL METER CIRCUIT PLATE (w/o Multi-information Display)
Install the meter circuit plate.
83821A
2.INSTALL NO. 1 COMBINATION METER COVER
Engage the 4 claws.
Install the No. 1 combination meter cover with the 8 screws.
3.INSTALL NO. 1 COMBINATION METER LENS (w/ Multi-information Display)
Engage the 2 guides to install the No. 1 combination meter lens.
4.INSTALL NO. 2 COMBINATION METER COVER (w/ Multi-information Display)
Engage the 10 claws.
Install the No. 2 combination meter cover. with the 2 screws.
83138G
5.INSTALL COMBINATION METER GLASS
Engage the 8 claws.
Install the combination meter glass with the 2 screws.