Home › Vehicle Interior › MIRROR (INT) › INNER REAR VIEW MIRROR › 2012.03–2017.12
RM2070E _58 Vehicle Interior _061941 MIRROR (INT) _0301797 INNER REAR VIEW MIRROR G

MIRROR (INT)  INNER REAR VIEW MIRROR  INSPECTION  


PROCEDURE

Hide 87810 1.INSPECT INNER REAR VIEW MIRROR ASSEMBLY

a.

Inspect the operation of the electrochromic inner mirror.

B273027E04
4.854,1.781 5.219,2.146 false 5.344,1.51 5.792,1.969 false 0.563,0.156 0.75,0.313 0.188,0.156 10 false *a 5.25,2.156 5.458,2.375 0.208,0.219 10 false *2 1.948,1.844 2.188,2.146 0.24,0.302 10 false *5 5.833,1.969 6.01,2.104 0.177,0.135 10 false *1 3.979,2.917 4.208,3.167 0.229,0.25 10 false *3 5.917,2.917 6.094,3.094 0.177,0.177 10 false *4

Text in Illustration
*1 Forward Sensor *2 Black Colored Tape
*3 Bright *4 Dark
*5 Auxiliary Battery - -
*a Component without harness connected
(Inner Rear View Mirror Assembly)
- -

i.

Connect a positive (+) lead from the auxiliary battery to terminal 4 and a negative (-) lead to terminal 1.


ii.

Press the AUTO switch.


iii.

Attach black colored tape to the forward sensor to prevent it from sensing.


iv.

Light up the mirror with an electric light, and check that the mirror surface changes from bright to dark.

Standard:

Mirror surface changes from bright to dark.


If the result is not as specified, replace the inner rear view mirror assembly.