Be sure to correctly follow the removal and installation procedures for the lower No. 1 instrument panel airbag assembly.
73900
1.INSPECT LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY (for Vehicle not Involved in Collision)
Perform a diagnostic system check (See page Vehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM>DTC CHECK / CLEAR).
Visually check for defects with the lower No. 1 instrument panel airbag assembly installed on the vehicle.
The defects are as follows:
Cuts
Small cracks
Significant discoloration
No defects are found.
If any of the defects is found, replace the lower No. 1 instrument panel airbag assembly with a new one.
73900
2.INSPECT LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY (for Vehicle Involved in Collision and Airbag not Deployed)
Perform a diagnostic system check (See page Vehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM>DTC CHECK / CLEAR).
Visually check for defects with the lower No. 1 instrument panel airbag assembly removed from the vehicle.
The defects are as follows:
Cuts
Small cracks
Significant discoloration
Cracks or other damage to the connector
Deformation or cracks on the lower instrument panel sub-assembly or instrument panel reinforcement assembly
No defects are found.
If any of the defects is found, replace the lower No. 1 instrument panel airbag assembly, lower instrument panel sub-assembly or instrument panel reinforcement assembly with a new one.