Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › CURTAIN SHIELD AIRBAG ASSEMBLY
RM2070E _58 Vehicle Interior _061942 SUPPLEMENTAL RESTRAINT SYSTEMS _0301803 CURTAIN SHIELD AIRBAG ASSEMBLY G

SUPPLEMENTAL RESTRAINT SYSTEMS  CURTAIN SHIELD AIRBAG ASSEMBLY  ON-VEHICLE INSPECTION  


CAUTION / NOTICE / HINT

CAUTION:

Be sure to correctly follow the removal and installation procedures for the curtain shield airbag assemblies.


PROCEDURE

Hide 62180A 1.INSPECT CURTAIN SHIELD AIRBAG ASSEMBLY (for Vehicle not Involved in Collision)


b.

Visually check for defects with the curtain shield airbag assemblies installed on the vehicle.

HINT:

The defects are as follows:

·

Cuts on each pillar garnish or the roof headlining assembly around the curtain shield airbag assemblies

·

Small cracks on each pillar garnish or the roof headlining assembly around the curtain shield airbag assemblies

·

Significant discoloration on each pillar garnish or the roof headlining assembly around the curtain shield airbag assemblies



OK:

No defects are found.


If any of the defects is found, replace each pillar garnish or the roof headlining assembly with a new one.


Hide 62180A 2.INSPECT CURTAIN SHIELD AIRBAG ASSEMBLY (for Vehicle Involved in Collision and Airbag not Deployed)


b.

Visually check for defects with the curtain shield airbag assemblies removed from the vehicle.

HINT:

The defects are as follows:

·

Cuts

·

Small cracks

·

Significant discoloration

·

Cracks or other damage to the connector



OK:

No defects are found.


If any of the defects is found, replace the curtain shield airbag assembly with a new one.