Use the same procedure for RHD and LHD.
The following procedure is for LHD.
55480D
1.REMOVE LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY
84010D
2.REMOVE INTEGRATION CONTROL AND PANEL ASSEMBLY (w/ Lane Departure Alert System)
Disengage the 2 claws to remove the integration control and panel assembly.
84770A
3.REMOVE PRE-CRASH SYSTEM CANCEL SWITCH ASSEMBLY (w/o Lane Departure Alert System)
for LHD:
Disengage the 2 claws to remove the pre-crash system cancel switch assembly.
for RHD:
Disengage the 2 claws to remove the pre-crash system cancel switch assembly.